Industrial Testers & Calibrators

OR, you may choose to have a replacement. We will reply you ASAP.

Features: 100% Brand new and High quality. This set offers Last number redial, On/Off and hangup buttons, so the lineman can check your telephone line fault. FSK/DTMF dual system. Hangup button. Last number redial.

This Cabac T180 Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation. It works with any Tone Generator to identify wires. CABAC Tone Generator.

The Fluke Networks TS19 Test Set combines all the essential test set features at an affordable price. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines.

100% Brand New and high quality More convenient to install, debug and maintain the telephone lines Judge continuity of the cables or wires Track the cables or wires, and diagnose the break point of the cable Powered by 2 x 9V (6F22) batteries Receiver dimension: about 238x43x26mm Emitter dimension: about 145x35x25mm Including a Sender MS6812-T and a Receiver MS6812-R With RJ11 connector cable (about 40cm) on the Sender for plugging into the telephone line jack to be tested With 2 Alligator clips (Cable length: about 70cm) for clip on the cable to be tested directly UPC Does not apply MPN Does not apply Brand Generic.

Buttinski Phone Test Lead RJ12 to Krone Plug, RJ12 and Alligator Clips with a curly cord. *** 6 Month Manufacturers Warranty***

Buttinski butt Test Lead RJ12 to Krone Plug, RJ12 and Alligator Clips 1.0M *** 6 Month Manufacturers Warranty***

The 1652C Installation Tester builds upon the rugged reputation of the earlier 1650 Series, only it’s re-designed to meet your need for more productive test tools. The 1652C Installation Tester verify the safety of electrical installations in domestic, commercial and industrial applications.

Kyoritsu Model 6201.

The TNT-EL Portable Appliance Tester is a low cost, Australian made, advanced safety tester that is ideal for all general testing requirements. This unit tests sensitive electronic equipment that cannot be tested using a standard insulation tester.

Features: 100% Brand new and High quality. This set offers Last number redial, On/Off and hangup buttons, so the lineman can check your telephone line fault. FSK/DTMF dual system. Hangup button. Last number redial.

After dialing the number, if you hear a busy tone, press the [FLASH] button, the phone will automatically close the line once. Put One side of the line access to the junction box or other receptacle link.

40Pcs Dupont Wire Jumper Cables 20cm M-M M-F F-F 1P-1P For Arduino Breadboard. 1Pc Connector N Male Crimp 90° RG58 RG142 LMR195 RG400 Cable Right Angle. Model: Emergency Test Clips. Flexible Stranded UL1007 16AWG~30AWG Electronic Wire PVC Cable 300V ROHs B.

SafeTcheck S8 Portable Appliance Tester. Testing the electrical safety of appliances with the SafeTcheck S8 Portable Appliance Tester is simple and fast. Accuracy and operator safety are the key features built into the unit.

A decade box is a really handy device for trying capacitor and resistor values in-circuit before you select the final value to solder down. The circuit has a residual resistance of 1Ω and residual capacitance of 20pF.

Digital network cable toner and probe traces and locates cables on active network. Isolates individual wire pairs precisely by changing tone when shorted. RJ45 Patch Cables. RJ11 Patch Cables. Isolates cable and wiring within a bundle, despite cable bleed.

Fluke Networks TS54-A-09-TDR TS54 Pro ABN with Piercing Pin. Up for grabs is a TS54 Pro with Piercing Pins.

Account Number: 454284415. In this event, we will inform you of the error as soon as possible and give you the option of reconfirming your order or cancelling it. The Series 65-120 Portable Pneumatic Calibrator is a pressure-vacuum test stand wholly contained in a carrying case.

Fluke 725 Multifunction Process Calibrator with high performance. Multifunction Process Calibrator 725. Cosmetically there various marks from use and writing on the casing. (see pictures). Meter is in good working condition.

Fluke Networks TS52 PRO Test Set with ABN/PP Clips. The TS52 PRO Test Set features backlit LCD and glow-in-the-dark keypad. 2-way hands-free speakerphone —for true hands-free conversation. DSL/POTS Filtering Technology —allows technicians to clip on a live DSL line to test POTS service without downing or disrupting data service.

Used item, in good working condition. Battery, user manual and carry case included. P refer cash on pickup.

Fluke 789 Process Meter / Loop Calibrator Near brand new condition Comes with: • One x set of New batteries • One x Genuine Fluke soft case • One x set of test leads *** Tax invoice provided with purchase *** Paypal not preferred, direct deposit or cash on pickup is prefferred method of payment $25.00 flat rate shipping Australia-wide via TNT Express This item is listed elsewhere and may be removed at any time.

Detecting interruptions and short circuit in cables and electrical lines buried in wall or earth. Cable Depth Measurement :Receiver 0-2.5 m (wall / underground cable). Detecting interruptions and short-circuits in floor heating.

Providing DTMF output only and being line-powered, no internal batteries are required. A unique 20dB 'BOOST' button, when switched on, allows the user to set aside the phone and still hear dial tone, speech etc.

SM 1310 and 1500nn MM 850 and 1300nm

Pro3000 Analog Probe The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch.

Compact, simple to use, easy to carry. Automatic switch test and pressure leak test. Simultaneous dual reading capability. 32 IDOS® ‘Plug-N-Play’ Pressure modules from 10 inH2O to 10,000 psi (25 mbar to 700 bar).

Physical condition is good. It powers on and has passed anElectrical Safety Test to AS/NZS 3760 standard, it came from a working lab environment. It also tested by our technician and in good working order.

We endevour to provide images of the actual item but in some instances may use photos of another item (same model item). Physical condition is good. It came from a working lab environment. It also tested by our technician and in good working order.

MS7221 Volt/mA Calibrator is a source and measurement tool. But the calibrator cannot be used to measurement and source simultaneously. MS7221N 40000 VOLT/mA multi-function Calibrator fit FLUKE 787 process.

Physical condition is good. It powers on and has passed anElectrical Safety Test to AS/NZS 3760 standard, it came from a working lab environment. The 5215A is used with the Fluke 5200A AC Calibrator for a combined output ranging from 100 to 1100 Vrms at frequencies up to 100 kHz.

As shown in photos, it comes with leads, safety information and CD containing the necessary documentation for proper use and operation.

The recorded time is then translated into an accurate distance measurement. TDR helps to pinpoint where cabling faults occur. Connection issues are not always associated with cable faults, so VDV II Pro has the capability to help identify service related issues.

IDEAL Networks 62-200 LinkMaster Wiremap and Continuity Tester Shielded and Unshielded Cat 5/5e/6/6A LAN Cable. The LinkMaster™ Tester consists of two units. The main unit is connected to one end of the cable to be tested and the remote unit is connected to the jack at the far end of the cable (wall outlet, patch panel port, etc.).

Fluke Networks Pro3000 Tone Generator and Probe Kit Smart tone Technology New.

In great condition as per photos.