Krick RC Model Vehicles, Toys & Control Line

2 x 6v Halogen Deck Lights. Isle of Man IM, Channel Islands, Scilly Isles ( £14.00 per parcel). Working model. 14 x 10mm.

The Dolly is a 1:20 scale radio-controlled semi-scale model of a harbour launch. For true-scale appearance of the Dolly, a fittings kit is included as standard and contains parts such as bollards, lifebelt, flag with flag stick, vents, horn, searchlight and working navigation lights with brass fittings.

This is a scale model of a Hamburg harbour launch of the 1960's. So prolific are these boats they can be found in almost every German harbour. Felix was produced from original drawings of a Hamburg harbour launch.

The WSP47 is a semi-scale replica of a typical police boat. This model is impressive not only because of its pleasing appearance and simple structure, it also allows some nice detail. A fire extinguisher monitor and a radar is included in the basic kit and an optional pump and radar-drive motor are available to give full functionality.

The Lisa M. is a typical motor yacht, like you would find in most ports and Marinas worldwide. It has a classical and elegant design with good performance. All parts of the structure are laser cut from plywood.

It is even possible to install a fully working crane; the crane itself is included in the kit. The Happy Hunter is a 1:50 scale reproduction of a Dutch ocean-going salvage tug. These are low-revving power plants driving a pair of high-performance marine propellers.

The Romarin model kit of the Neptune is particularly distinguished by the fact that the necessary parts for running such as the Kort nozzle, propeller shaft and propeller are included in the kit. The ABS hull and parts such as bulwark, superstructure and funnel shorten the construction time significantly.

Katja is a model of an elegant four-seater sports boat with inboard motor. The model essentially consists of seven plastic parts. The deck and cabin are moulded in one piece in clear plastic, which eliminates the complex task of cutting out and installing the glazing panels.

Also included as standard in the kit is a comprehensive fittings kit to complete all that scale detailing including working lights, brass fittings, life rafts, ladder assemblies, rubber tyre fenders, life belts, anchor, chain, flag, etc.

The WSP47 is a semi-scale replica of a typical police boat. This model is impressive not only because of its pleasing appearance and simple structure, it also allows some nice detail. A fire extinguisher monitor and a radar is included in the basic kit and an optional pump and radar-drive motor are available to give full functionality.

The Katia can be used free-propelled or with remote control. In the free ride the rudder is set to a fixed radius. Equipped with a remote control that Katia is extremely versatile and due to the engine very Flink.

The aim of this design was to develop a modular system that combines the typical appearance with the simplest possible construction. Hence a beginner building kit has been created, which has lost none of its fidelity.

This is a scale model of a Hamburg harbour launch of the 1960's. So prolific are these boats they can be found in almost every German harbour. Felix was produced from original drawings of a Hamburg harbour launch.

Used condition. Unbuilt kit has wingspan of 133 in. (3400mm) and length of 55 in. (1400mm). Kit is complete with all parts, plans and instructions.

Rick Alu Spinner 3 blade Ø 115 mm / 4.5 in 30951. The CNC machined and polished two-piece aluminum spinner are available for 2- or 3-blade propeller in many sizes. Details included in the table below.