Pipe Threaders, Taps & Dies

6PCE-NPT 1/4"-3/4" ALLOY STEEL TAP & DIE SET. made of alloy steel, straight flute, precision ground thread and heat treated, for tapping most material.

BSPT 3/8" to 1-1/4" RATCHET PIPE THREADER KIT WITH 5 DIES (PT1). BSPT british standard pipe thread cutters, make smooth, accurate threads in 3/8", 1/2", 3/4", 1", 1-1/4" pipe or other tubular material, 20" rathet handle provides plenty of leverage, and features easy reversing knob, super sharp dies are replaceable.

Using High-quality steel, high hardness quenching rigid and long service life; sharp cutting performance, good chip effect; good surface finish, large chip flutes, removal chip smooth. 1x 1/4" - 18 NPT HSS Taper Pipe Tap.

6PCE NPT 1/4" to 1-1/4" ALLOY STEEL PIPE TAPS (NEW). Sizes: 1/4"-18 NPT; 3/8"-18 NPT; 1/2"-14 NPT; 3/4"-14 NPT; 1"-11.5 NPT; 1-1/4"-11.5 NPT.

BSW & BSF & BSP 39Pce Tap & Die Set Alloy Steel. 10pc BSW die size: 4-40, 6-32, 8-32, 10-24, 12-24, 1/4-20BSW, 5/16-18BSW, 3/8-16BSW, 7/16-14BSW, 1/2-12BSW. 6pc BSF die size: 10-32, 1/4-26BSF, 5/16-22BSF, 3/8-20BSF, 7/16-18BSF, 1/2-16BSF.

QUALITY SUTTON 5/8"UNF ,2" O.D. CHROME ALLOY BUTTON DIE.

DIES M1 / M1.1 / M1.2 / M1.4 / M1.6 / M1.8 / M2 / M2.2 and M2.5. High Speed Steel (HSS) is the best material for tap and dies. If you are cutting loads of new threads or using tap and dies regularly you need HSS.

• 5 pces HSS Ground Drills (5.2mm, 6.3mm, 8.3mm, 10.4mm, 12.4mm). • 110 Stainless Steel threading Inserts (25 pces of each M5x0.8mm, M6x1.0mm, M8x1.25mm, M10x1.5mm and 10 pces M12x1.75mm), insert length = 1.5D.

Thread, cut and ream water pipe, electricity pipe, or gas pipes, with ease using this electric Pipe Threading Machine. Its 1/2" to 2" pipe capacity handles every pipe situation. Designed for efficiency, the Pipe Threading Machine includes a built-in cutting oil pump, quick pipe clamping collar and built-in pipe cutter and reamer.

Using High-quality steel, high hardness quenching rigid and long service life; sharp cutting performance, good chip effect; good surface finish, large chip flutes, removal chip smooth. 1x 1/4" - 18 NPT HSS Taper Pipe Tap.

Can forge cast iron, alloy, steel, metal and other material processing, has a high cost performance and practicability. 1x Piping Thread Tap. Suitable for hand electric drill, bench drill, machine tools, machining center equipment use, can be used by hand or machine.

Tap size (2pce American parlance: taper & plug each): M1x0.25; M1.1x0.25; M1.2x0.25; M1.4x0.3; M1.6x0.35; M1.8x0.35; M2x0.4; M2.2x0.45; M2.5x0.45. die size (1pce each): M1x0.25; M1.1x0.25; M1.2x0.25; M1.4x0.3; M1.6x0.35; M1.8x0.35; M2x0.4; M2.2x0.45; M2.5x0.45.

10PCE 3/8"-16 Helicoil Type Thread Repair Inserts.

Increased heat resistance, extending the life of the tap, tap to make more resistant, and can attack the stainless steel parts. 1x Machine tap. High hardness, high wear resistance, for stainless steel, iron and other drilling.

Description:   100% New and high quality. It is a 3/8"-18 plug tape. Fits for maintenance and repair work. It is used to cut internal threads in pipes   Material: High speed steel. Size: 3/8" - 18 NPT   Note: Z=NPT taps for taper pipe threads   Package include:   >1 x screw tap Country/Region of Manufacture China MPN Does not apply Brand Ubranded UPC Does not apply.

Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on. 140" wall thickness (Schedule 40). RDB-050 – 1 – ¼” ROUND PIPE DIE SET 4”CLR PART NO.

Center line radius is based on. 083 wall thickness. RDB-050 – 1 1/4" ROUND TUBE. 4" CLR PART NO.DS-180-1250T-R400. Part No. Center Line Radius 4". Degree of Bend (Max) 180°. Item Number DS-180-1250T-R400.

RDB-050 – 1 3/8" DIE SET 5CLR PART NO. Part No. NO PHOTOS AVAILABLE.

3/4 x14tpi BSP DIE NUT. Not recommended for cutting new threads – if a new thread is required a button die is recommended. These Die Nuts are Thread Cleaners only. PARALLEL TYPE. Die code. Die Price. Tap Set Price.

12pc 6 size BSP TAP SET. TAP SIZE HAS 2 LEADS STARTER & PLUG. Tap Set Price. our sets save you 40% OFF OUR LIST PRICE FOR SINGLE SIZES BELOW. Tap Code. includes 1/8-1/4-3/8-1/2-5/8-3/4" PARALLEL TYPE.

There are a couple of splits in the cable, which will need replacing at some point in the future. Full cleaned and tested. All cutting fluid has been painstakingly cleaned up, all metal fillings removed and everything tested.

BSPT british standard pipe thread cutters are made of alloy tool steel.

1/2 x 14tpi BSP DIE NUT. Not recommended for cutting new threads – if a new thread is required a button die is recommended. These Die Nuts are Thread Cleaners only. PARALLEL TYPE. Die code. Die Price.

Quality set of mini HSS taps & dies, for small precision imperial threading job, made from high speed steel. tap size ((2pce American parlance: taper & plug each): 00-90; 0-80; 1-64; 1-72; 2-56; 2-64; 3-48; 3-56; 4-40. ).

DIES M1 / M1.1 / M1.2 / M1.4 / M1.6 / M1.8 / M2 / M2.2 and M2.5. High Speed Steel (HSS) is the best material for tap and dies. 31pcs/set High speed steel Tap and Die set. If you are cutting loads of new threads or using tap and dies regularly you need HSS.

One set cutter 1/2" to 3/4" (4pce cutter) only, not including the pipe threader and other cutter set. BSPT 1/2"-3/4" PIPE THREAD CUTTER SET. suits to our manual pipe threader (PT2).

One set cutter 1"-2" (4pce cutter) only, not including the pipe threader machine and other cutter set. NPT 1"- 2" PIPE THREAD CUTTER SET (PT4). suits to our power pipe threader machine(PT4).

Including die holder: 1" die holder (for die M24-25mm) overall length 200mm, 1-1/2" die holder (for die M32-38mm) overall length 285mm.

DIES M1 / M1.1 / M1.2 / M1.4 / M1.6 / M1.8 / M2 / M2.2 and M2.5. High Speed Steel (HSS) is the best material for tap and dies. 31pcs/set High speed steel Tap and Die set. If you are cutting loads of new threads or using tap and dies regularly you need HSS.

One set cutter 1" to 1-1/4" (4pce cutter) only, not including the pipe threader and other cutter set. BSPT 1" to 1-1/4" PIPE THREAD CUTTER SET. suits to our manual pipe threader (PT2).

24pce x metric 60° pitch gauges: 0.25-6.0mm. 28pce x whitworth 55° pitch gauges: 4-62TPI.

QUALITY 5/8" 11TPI ,SUTTON DIE NUT, NEVER BEEN USED. TUNGSTEN CHROME ALLOY, MADE IN AUSTRALIA.

TAP SIZE HAS 2 LEADS STARTER & PLUG. 1"x11tpi BSP TAP SET. Tap Set Price. PARALLEL TYPE. Tap Code.

One set cutter 1-1/2" to 2" (4pce cutter) only, not including the pipe threader and other cutter set. BSPT 1-1/2" to 2" PIPE THREAD CUTTER SET.

1/8 x28tpi BSP DIE NUT. Not recommended for cutting new threads – if a new thread is required a button die is recommended. These Die Nuts are Thread Cleaners only. Die code. Die Price. Tap Set Price. All tap dies are made to Din standards.

QUALITY SUTTON 3/4"UNC ,2" O.D. CHROME ALLOY BUTTON DIE.

QUALITY SUTTON 3/4"UNF ,2" O.D. CHROME ALLOY BUTTON DIE.

QUALITY SUTTON 1/2"UNF ,2" O.D. CHROME ALLOY BUTTON DIE.

QUALITY SUTTON 1/2"UNF ,2" O.D. CHROME ALLOY BUTTON DIE.

QUALITY SUTTON 9/16"UNF ,2" O.D. CHROME ALLOY BUTTON DIE.

BSPT british standard pipe thread cutters are made of alloy tool steel.