RC Model Vehicle Gyros

3 Modes (Off, Stabilise and RTH). BGL-6G-AP Flight Stabiliser with RTH - Setup - YouTube. And the unit is a lot smaller. Weight: 28g (Total inc. In Stabilise mode your plane bank angle will be held under 45 Deg. ).

Holybro Kakute F7 AIO. The Kakute F7 AIO’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy. MCU: STM32F745 32-bit processor Weight: 11.2g.

Hold that perfect drift angle combined with high speeds with this Gyro pre-loaded with a customized firmware for Drifting! The gain (Or sensitivity) can be adjusted on the fly for drifters with transmitters featuring more than three channels and also can be adjusted on the gyro itself.

The Illuminati 32 is Cleanflight supported for easy setup and use. This setup gives your quad fast response making flying a breeze. Now you can get all your flight details straight on your display.

Holybro Kakute F7. The Kakute F7’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy. MCU: STM32F745 32-bit processor Weight: 8.2g. Supports Betaflight, Butterflight, and Cleanflight.

Add flight controller switch control mode and three-axis locking(AVCS) mode Adopts angle vector control algorithm, realtime test and correct angle drift of 3-Axis. Locking mode greatly improves airplanes stablity. Add switch channel to switch mode during flight. Color: BlackSize: 26*39mm Weight: about 6g Working Volt: 3.5-6VSensitivity debug,we suggest that in lowest position in maiden flight,and according to add 5 mins range Each to process the Test flight adjustment.When the flight controller factory settings,in 50% position,please do not put the set factory settings as standard,and adjust right sensitivity according to your airplane and power parameter. Package list: 1 * P1-GYRO 3-Axis Flight Controller Stabilizer.

Matek F405 STD. In the F405 STD product page, you will find helpful information on. VCP, UART 1, UART 2, UART 3, UART 4, UART 5 Built in inverter for SBUS input (UART2-RX). Due to the nature of this hobby, we can only cover item that are Dead On Arrival (DOA).

Matek F405 WING. In the F405 WING product page, you will find helpful information on. Baro: BMP280 (I2C) BEC 5V: 2A Cont. VCP & 6 X UARTs Built in inverter for SBUS input (UART2-RX).

The Kakute F4 is designed to support all serial protocols at once. Holybro Kakute F4 V2. Supports Betaflight and Cleanflight. Betaflight OSD. 1 X Kakute F4 V2. New V2 Features. New high-performance / low-noise / high sensitivity IMU.

Press and hold the release button for more than 2 seconds, the JHE42B Finder turns off the sound. 1 x JHE42B Finder. than the general buzzer. Much bigger. How to turn off the buzzer The buzzer has two modes of operation.

Matek F405 CTR. In the F405 CTR product page, you will find helpful information on. Baro: BMP280 (I2C) BEC 5V: 2A Cont. VCP, UART 1, UART 2, UART 3, UART 4, UART 5 Built in inverter for SBUS input (UART2-RX).

GEPRC SPAN F4 Tower 40A. Cont.Current:4 40A. Model:SPAN F4 Tower. SPAN Tower is developed based on this idea. It includes FC(F405),ESC40A, VTX 5.8g 25/200/600mw. On-Board LC Filter for clear video images.

Built in 5V 1A BEC. 1 SP Racing F4 EVO FC. 3 primary flight modes: Acrobatic, Angle and Horizon. Altitude Hold Mode. Heading Hold Mode. BOOT switch for easy firmware upgrades. 36x36mm/1.42 1.42in board with 30.5mm/1.2in mounting holes.

• Cleanflight & Baseflight support. Unique wire-to-board connectors make wiring quick and simple, while the micro USB port allows you to customise your setup and fine tune the Skyline32 from your PC.

Mini Drill Set, 20 Piece set includes sizes #60 to 80.

Airbot Omnibus Fireworks V2. Built-in Professional Level PDB. Model: Omnibus Fireworks V2 Current Sensor: 150A (Max 320A). Tantalum Capacitors can be added to the board (not included). 1 X Omnibus Fireworks V2.

GEPRC Stable F4 Mini Tower. It has been updated to V1.2, very stable. The Stable Mounting Hole is 20 20mm, which is suitable for most racks. ESC 4 IN 1 (BLHelis 20A). Model: Stable F4 MiniTower. Current: 20A.

MARINE ESC-50. WEIGHT: 82g.

Add switch channel to switch mode during flight. Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

Airbot Omnibus F4 Nano V6. Output for 4 motors on JST-SH 1.0 8pin plug connects to Airbot Wave 4in1 ESC (The Option 8pin 4in1 Cable). Built in L-C filter to provide clean power to FPV kit. Model: Omnibus F4 Nano V6 Current Sensor.

The Kakute F4 AIO V2’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy. Holybro Kakute F4 AIO V2. 1 X Kakute F4 AIO V2. New V2 Features. New high-performance / low-noise / high sensitivity IMU.

160A HV OPTO V5 p/n 30201650 Cont./Peak Current 160A/200A Input 6-14S LiPo BEC  NO Input /output wire 10AWG-150mm Input connector NO Output connector NO Size 110x50.3x33.3mm weight 221.5g  .

130A HV OPTO V5 p/n 30201500 Cont./Peak Current 130A/160A Input 6-14S LiPo BEC  NO Input /output wire 10AWG-150mm Input connector NO Output connector NO Size 110x50.3x33.3mm weight 221.5g  .

Matek F405 MINI. In the F405 MINI product page, you will find helpful information on. IMU: 32K ICM20602 Gyro/SPI Current Sensor: No (FCHUB-A5 Option). VCP, UART 1, UART 2, UART 3, UART 4, UART 5 Built in inverter for SBUS input (UART2-RX).

Airbot Omninxt F7. Model: Omninxt F7 Current Sensor Port for easy connection to Airbot 4-in-1 esc (SH1.0 8P). 1 X Omninxt F7. F7 MCU processors. MCU: STM32F7XX BEC 5V: 1A Cont. IMU: MPU6000 & ICM20608 BEC 8V: 1A Cont.

Battery cable. -Supported RX types: Sum. Signal - Spektrum Sat. (Serial / DSM2 & DSMX). -Mounting Holes: 30.5x30.5mm pattern, with 3.2mm holes (widely compatible). -Weight: 5.5g.

Features: CC3D flight control system is mainly used for QAV250 and 4-axis aircraft, is the mainstream of flight controller. CC3D flight control using a 32-bit CPU chip, which is faster than 8-bit APM flight control system. CC3D flight control using the MPU - 6000 gyroscope, is higher precision. Specifications: Housing material: plastic Housing color: yellow Whole dimension: 39mm x 38mm x 13mm Board dimension: 36mm x 36mm Package includes: 1 x CC3D board with yellow protection shell 1 x 8-pin cable 2 x 4-pin cable Brand Unbranded MPN Does not apply UPC 4894663135232.

‘HOLD-Lock Heading’ test in light winds.

Basically new as it was installed on a build that was never flown and then removed after testing.

Name: hobbywing FlyFun-120A-V5 ESCCurrent: 120A / 150ABattery: 3-6S LiPoWeight: 93gSpecifications: 77.2x34.6x19.2mmSwitching regulator BEC, 5.2V / 6V / 7.4V third gear adjustable; output current for 8A, instant 20ASetting card: LED digital tube setting card. Or remote control settings.(DEO --- Driving Efficiency Optimization), which is used to optimize the efficiency of synchronous rectification,Bring faster and more linear throttle response, flight stability and flexibility at the same time to be strengthened; lower temperature rise,Electric transfer work more reliable; higher drive efficiency, extended life time.Slow start technology, adaptive ducted motor, reverse thrust function,More like a real, fixed wing flight to add more funThe new design of mu.

As pictured FBL Spektrum DSMX Receiver Flybarless Gyro PICK UP ONLY.

Add switch channel to switch mode during flight. Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

Zero Autopilot Osd - Zu-Osd.

Dji Naza M V2 Gps Combo - Djinazamv2-01.

Add switch channel to switch mode during flight. Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

The Hobbywing Fly Fun 40A V5 ESC contains and incredible amount of features inside, at an incredible price point! 40A continuous current, bursts up to 60A for 10 seconds, 2-6s LiPo capabilities, and a selectable 5.2/6/7.4V BEC with a heavy duty 8A current rating. DEO Technology is included, alternatively known as Active Freewheeling. This provides a improved throttle response, stability, and flexibility in flight. Additionally improved efficiency levels are included along with lower ESC temperatures.      Features:  Start-Up Protection ESC Thermal Protection Over-Current Protection Over-Load Protection .

Zero Gemini M Flight Controller - Zu-Geminim.

Features: Flight Control For Racing Quadcopter FPV USB Conflict resolution Hardware inversion, SBUS or telemetry can be used on any of the 3 available hardware serial ports..

Gyro Sensor: SMM (Silicon Micro Machine) system vibration gyro. -Missing the small plastic flat head adjusting tool.

(Cheap FBL gyro. Grab a bargain! CASH ON PICKUP available ), You.

The XRotor Nano 20A 4in1 BLHeli-S DShot600 not only includes 4 high-performance 20A ESCs, but also a volt monitoring port which allows FC to monitor the voltage in real time (on condition that the FC supports this function). With the incredibly small size, the installation and wiring can be very simple and easy when pairing it with the Hobbywing XRotor Nano Flight Controller. It’s an ESC specially designed for super mini-sized indoor FPV.  The use of EMF8BB21F16G MCUs with the operating frequency of up to 48MHz, imported high quality MOSFETs, 3-in-1 drive ICs and ceramic capacitors, 3-ounce copper, and 6 layers of PCBs guarantees less heat, higher efficiency and rapider response.