RC Model Vehicle Hardware & Fasteners

This 8 piece x 48mm long set includes most sizes needed to work on many RC vehicles. 1 x 8mm Magnetic Hex Bit. 1 x 1.5mm Magnetic Hex Bit. 1 x 2mm Magnetic Hex Bit. 1 x 2.5mm Magnetic Hex Bit. 1 x 3mm Magnetic Hex Bit.

Buy it now is for a set of 4 nuts. Nuts are self locking type, serrated face, not nyloc, flanged. Colour Blue. Manufacturers are constantly improving products and changes are made without prior notice.

T5 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40. This high quality Magnetic Hardened S2 and economical Torx bit set works great in most drills and 1/4″ hex drive screw drivers. This 12 piece x 50mm long T5-T40 set includes most sizes needed to work on many RC vehicles.

Easily fitted with a 7mm "box spanner" (Tamiya cross spanner). Set 4 (four) -REDANODISED steel flanged locknuts -wheel nuts to suit nearly all 1:10 th RC cars that use 4mm (the threaded part of the axle) axles.

Miniature ball bearings are available ball bearings of quite small size. Quantity: 10pcs. Deep Groove Ball Bearings. 10 x Bearings. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls.

Miniature ball bearings are available ball bearings of quite small size. Quantity: 10pcs. Deep Groove Ball Bearings. Size: Approx.5 11 4mm(ID OD H). Widespread bearing,economic and standard. Material: Bearing Steel.

Easily fitted with a 7mm "box spanner" (Tamiya cross spanner). Set 4 (four) -SILVERANODISED steel flanged locknuts -wheel nuts to suit nearly all 1:10 th RC cars that use 4mm (the threaded part of the axle) axles.

It’s a suitable for low speed transmission,trundle,toy car etc. is provided once the item is dispatched. Long-life;High precision and low noise.

World Champion ACER Racing 5x9x3mm Ceramic Ball Bearing. This is a 5x9mm ceramic ball bearing also known as a size MR95 ball bearing. Diamond polished Silicon Nitride (Si3N4) Balls, HSR cage technology and sealed on both sides.

ADVISE SIZE REQUIRED WHEN PLACING ORDER. M12 ID 11.0mm OD 13.6mm. M11 ID 10.2mm OD 12.5mm. M10 ID 9.3mm OD 11.5mm.

For sale is a lot of 100 cable ties - a mixture of colours- 20 x the 5 colours shown above- red, yellow, blue, green and rose/pink. Ties are 100mm long (total). Suitable for any number of uses. The “second item rule “applies.

Yeah Racing Stainless Steel Screw Assorted Set (400pcs) with FREE Mini box.  Stainless Steel Screw Assorted Set (400pcs) with FREE Mini box. Suit most common RC cars that use 3mm screws, including HPI, HBX, Tamiya Kyosho, Sakura, Axial etc.

ARRMA Button Head Screw 3x35mm (10) 721335 This Is The ARRMA Button Head Screw 3x35mm (10) 721335 These are the 3x35mm Button Head Screws from Arrma. FEATURES: Steel construction Used on Arrma vehicles INCLUDES: Ten 3x35mm Button Head Screws REQUIRES: 2mm hex wrench, This Is The ARRMA Button Head Screw 3x35mm (10) 721335.

Easily fitted with a 7mm "box spanner" (Tamiya cross spanner). Set 4 (four) -GreenANODISED steel flanged locknuts -wheel nuts to suit nearly all 1:10 th RC cars that use 4mm (the threaded part of the axle) axles.

1x Front Bumper. 3x counter sunk head mounting screws.

Easily fitted with a 7mm "box spanner" (Tamiya cross spanner). Set 4 (four) -ORANGEANODISED steel flanged locknuts -wheel nuts to suit nearly all 1:10 th RC cars that use 4mm (the threaded part of the axle) axles.

Easily fitted with a 7mm "box spanner" (Tamiya cross spanner). Set 4 (four) -Light BLUEANODISED steel flanged locknuts -wheel nuts to suit nearly all 1:10 th RC cars that use 4mm (the threaded part of the axle) axles.

Easily fitted with a 7mm "box spanner" (Tamiya cross spanner). Set 4 (four) -PurpleANODISED steel flanged locknuts -wheel nuts to suit nearly all 1:10 th RC cars that use 4mm (the threaded part of the axle) axles.

1x Rear Bumper. 2x counter sunk head mounting screws.

Hex head (allen key). flat head (countersunk).

Hex head (allen key). round button head.

Hex head (allen key). round button head.

Hex head (allen key). round button head.

The “second item rule “applies. Colour is dark blue.

No special tool needed -use a 7mm box spanner (not supplied). Nuts supplied are as per pics above, pic #3 is for reference and shows a blue nut. Buy it now is for a set of 4 nuts. Nuts are self locking type, serrated face, not nyloc, flanged.

Hex head (allen key). round button head.

The “second item rule “applies.

Nuts are self locking type, serrated face, not nyloc, flanged. Buy it now is for a set of 4 nuts. Manufacturers are constantly improving products and changes are made without prior notice. Net Weight.

No special tool needed -use a 7mm box spanner (not supplied). Nuts supplied are as per pics above, pic #3 is for reference and shows a blue nut. Buy it now is for a set of 4 nuts. Nuts are self locking type, serrated face, not nyloc, flanged.

Set 4 (four) -Pink?. Buy it now is for a set of 4 nuts. Nuts are self locking type, serrated face, not nyloc, flanged. Colour Pink/Purple. Net Weight. Manufacturers are constantly improving products and changes are made without prior notice.

Tamiya 3x30mm Cap Screw 2pcs 50584 This Is The Tamiya 3x30mm Cap Screw 2pcs Part Number 50584. This Is The Tamiya 3x30mm Cap Screw 2pcs Part Number 50584.

Hex head (allen key). flat head (countersunk).

Hex head (allen key). round button head.