• Sherline Wood Lathe And Tools

    It’s a 4spd 1500 RPM I believe and is mounted on wood but could be taken off to mount on a bench.
    AU $300.00
    Local pickup
    or Best Offer
  • Sherline 4111A Tailstock Assembly (inch)

    AU $163.58
    From United States
    AU $32.24 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 33050 - DC Motor & Speed Control

    In the “high torque” position the maximum speed is cut in half but torque at any given speed is much greater. If you are using the motor in non-Sherline applications, the maximum no-load speed of the motor shaft itself is 6000 RPM.
    AU $445.26
    From United States
    AU $56.89 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 1179 Deluxe WW Collet Set (Metric)

    These sets contain a complete selection of 14 Sherline WW collets, including a blank, 3/4″ and 1″ pot chucks with dowel pin, an adapter, drawbar and a knockout bar. A machined wood insert locates each part, plus a drawing in the lid reminds you where each part goes to keep things organized.
    AU $452.74
    From United States
    AU $48.19 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline Tool Part 54180 Deluxe Engraved Mill Table (Inch)

    AU $127.52
    From United States
    AU $33.41 postage
    Customs services and international tracking provided
  • Sherline CNC Ready Upgrade Kit for 4100 Mill (6725)

    Convert any existing Sherline lathe or mill to CNC-ready status. The installation will involve drilling and tapping several holes to attach the stepper motor mounts. The kits include drill blocks that attach to the appropriate table or bed.
    AU $368.04
    From United States
    AU $50.55 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 3750 Tilting Angle Table

    With the base mounted square to the mill table, parts mounted to the tilted table can be machined or drilled at precise angles. It can be set at any angle from 0° to 90°. The hole pattern in the table accepts Sherline’s mill vise or rotary table.
    AU $203.27
    From United States
    AU $41.64 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 3306 - Headstock, DC Motor, and Speed Control Assembly (2800 RPM)

    At 5500 rpm, 1.75 amperes (5 minutes on / 15 minutes off). • Speed in rpm: 6100 rpm continuous. • Output horsepower.06 KW (60 W) at 10 oz. / 6100 rpm. • Temperature rise at ambient 50° C.: Less than or equal to 45° C.
    AU $617.36
    From United States
    AU $75.10 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 3308 ER-16 Headstock and Motor Unit

    And other tool suppliers. Keep in mind that if the ER-16 nose is ordered, no Sherline accessories that use a #1 Morse taper or 3/4-16 thread will work on this spindle. All you need is the correct wall plug or converter.
    AU $844.69
    From United States
    AU $92.19 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline Tall Rigid Mill Column Upgrade (Tall Base) 5645

    The Sherline rigid column upgrade (tall base) 5645 is designed for those who have a 5400-series mill. Tall column provides more Z-clearance. Includes Y-leadscrew cover hole. The column has the newer style hole through the base to accept the Y-axis leadscrew cover tube.
    AU $522.04
    From United States
    AU $39.82 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 3570 Rotating Mill Vise Base

    When mounting the mill vise to the table, this base will allow the vise to be rotated to any angle. A witness mark is engraved on the side of the rotating collar that holds the vise. A locking ring underneath pulls the collar down onto the base to lock it securely when the two hold-down screws are tightened.
    AU $184.79
    From United States
    AU $32.79 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 5230 - Mill XYZ Base, 10 in, adjustable handwheels

    – Standard 10″ XYZ base from model 5500/5510 mill with adjustable “zero” handwheels. Part numbers and travels of these available XYZ bases are as. compared to the cost of a vertical milling column and XY base.
    AU $950.28
    From United States
    AU $107.18 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 5410-DRO METRIC Deluxe Mill Oil reservoirs on all axes. (5400-DRO INCH)

    Special handwheels are supplied with DRO machines. These handwheels can be reset to zero electronically with the push of a button on the DRO display box. Sherline DRO mills are outfitted with the special DRO 2″ (51mm) handwheels on the Y-asix leadscrew and X-axis table feed screw, and a 2.5″ handwheel on the Z-axis vertical feed screw.
    AU $1,686.51
    From United States
    AU $278.17 postage
    Customs services and international tracking provided
  • Sherline 1012 - Sensitive Drilling Attachment

    Sherline 1012 – Sensitive Drilling. drilling tasks easier. Just insert. rides on a ball bearing on the main shaft. Pull the drill downward. onto the spindle thread. To use, grasp the red, knurled ring which.
    AU $203.27
    From United States
    AU $33.28 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 2010 deluxe 8-direction milling machine (See 2000 for Inch version) NEW

    The column bed can be rotated side-to-side up to 90° in either direction for angled drilling. A special knuckle allows the column to be pivoted front to rear. The “ram” design of the column base also allows the entire ram to be pivoted up to 90° side-to-side.
    AU $1,523.80
    From United States
    AU $275.71 postage
    Customs services and international tracking provided
  • Sherline 3559 - 90 Degree Angle Plate

    This fixture is not limited to use on Sherline tools. This angle plate is a very useful work-holding fixture for milling. It can be used to hold parts on either the vertical or horizontal surface. Parts can also be held from two directions at once for extra-secure mounting.
    AU $184.79
    From United States
    AU $36.39 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 2295 Quick-change Carbide insert holder

    Wrench to tighten the screw is also included. Like the P/N 2250. This holder is not included with the P/N 2250 quick-change tool. holder is manufactured from steel, case hardened and given a black. oxide finish.
    AU $166.31
    From United States
    AU $32.31 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 40910 Lathe Saddle

    AU $156.81
    From United States
    AU $30.21 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 5400 Deluxe Mill

    The deluxe 5400-series mill is our most popular mill. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes. A second pulley position is also available to provide extra torque at low RPM if needed.
    AU $1,209.94
    From United States
    AU $228.07 postage
    Customs services and international tracking provided
  • Sherline Standard Headstock (no motor) 30100

    Threaded to accept 3/4 x 16 tools. Includes spindle pulley. Pulley groove side angle 19°. Spindle End Play (adjustable with preload nut), Factory Settings with 2800 RPM Pulleys: 0.0002″with 10,000 RPM Pulleys: 0.0003″.
    AU $208.11
    From United States
    AU $35.07 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline High-Torque Stepper Motor 67126 

    The high-torque stepper motors can also be used on any Sherline CNC machine. (For example, Sherline Complete CNC systems or P/N 8760 CNC 4-axis driver box kit.). Flats are ground onto each end of the shaft to accommodate set screws for handwheel and coupling.
    AU $177.39
    From United States
    AU $34.26 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 2000A (INCH) Deluxe Vertical Mill + "A" Package (2010A for Metric) NEW

    3020 5/32″ Sherline hex T-driver. The column bed can be rotated side-to-side up to 90° in either direction for angled drilling. A special knuckle allows the column to be pivoted front to rear. The “ram” design of the column base also allows the entire ram to be pivoted up to 90° side-to-side.
    AU $1,941.78
    From United States
    AU $301.37 postage
    Customs services and international tracking provided
  • Sherline 30110 - 9/16 (inch) Headstock Assembly

    AU $345.56
    From United States
    AU $35.17 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 67127 Stepper Motor

    Separate computer or driver. Sherline stepper motors have shafts at. used with a Sherline motor mount, the shaft going into the coupling. pre-wired in a connector that plugs directly into the Sherline.
    AU $138.59
    From United States
    AU $44.53 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 4335 - 10,000 RPM Pulley Set

    Sherline’s standard 2800 RPM, this pulley conversion may be just. watch shafts. modifications and not special tools are required. A second pulley. motor and drive belt to turn the spindle at up to 10,000 RPM.
    AU $147.83
    From United States
    AU $44.78 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 3561 - 90 Degree Angle Plate (Short)

    This fixture is not limited to use on Sherline tools. 90° angle plate which is 10″ long. Parts can also be held from two directions at once. This angle plate is a very useful work-holding fixture for milling.
    AU $110.87
    From United States
    AU $32.50 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 5800-CNC Next Generation MILL (18″ base) CNC-Ready for step motor mount

    Sherline Products is proud to introduce its latest Vertical Milling machine. The ability to swing the column arm from side to side has been eliminated in order to maximize the column’s ability to maintain its position during heavy cuts.
    AU $3,277.85
    From United States
    AU $340.81 postage
    Customs services and international tracking provided
  • Sherline 1291 Spacer Block Kit

    Accommodated in the standard Sherline lathe. Yet, occasionally it. The Sherline. the lathe to 6″ (152mm). P/N 1291 includes a 1-1/4″ (32 mm) spacer. Spacer blocks are intended for easy-to-machine materials or.
    AU $129.35
    From United States
    AU $32.98 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 5800A NexGen Vertical Mill PACKAGE "A" NEW! (MERTIC See Sherline 5810A)

    Sherline Products is proud to introduce its latest Vertical Milling machine. We are the first ever Sherline's online dealer! (Since 1996). Brass Lead screw cover for the Y-axis lead screw. 3020 5/32″ Sherline hex T-driver.
    AU $3,401.04
    From United States
    AU $388.03 postage
    Customs services and international tracking provided
  • Sherline 1030 - 3.1 in 4-Jaw Chuck

    This larger chuck takes up no more center-to-center space than the 2.5″ chuck, but it will hold larger work. With the jaws in the reversed position, work up to 2-3/4″ (70 mm) can be gripped. The hole through the chuck is. 687″ (17 mm).
    AU $249.47
    From United States
    AU $85.69 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 1044 2.5" 4-Jaw Independent Chuck

    Like the Sherline 3-jaw chucks, the 4-jaw chucks can be used to clamp either externally or internally. The 2.5″ (63mm) 4-jaw chuck (P/N 1044) is designed to grip from 3/32″ (2mm) up to 1-3/16″. A hex key (provided) is used to tighten each jaw individually.
    AU $203.27
    From United States
    AU $34.93 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline PN 8771 + USB CNC + MACH4 License + High Torgue Stepper Motors Mill Kit

    USB with the MACH4 software and complete setup files. Here’s what you do Attach the stepper motors to the stepper motor mounts on the on the X, Y and Z axes of your Sherline CNC-ready mill and plug the X, Y and Z cables from the driver box to the stepper motors.
    AU $1,847.84
    From United States
    AU $145.57 postage
    Customs services and international tracking provided
    6 watching
  • Sherline 1185 - Vertical Milling Table

    Parts to be machined are mounted to the vertical table. The vertical table is then mounted to the lathe crosslide table and the part is moved past a cutter held in the lathe spindle. This provides 3 axes.
    AU $221.75
    From United States
    AU $57.71 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline PN 8770 4 axis CNC controller, Power Supply + 3 Standard Stepper Motors

    Here’s what you do Attach the stepper motors to the stepper motor mounts on the on the X, Y and Z axes of your Sherline CNC-ready mill and plug the X, Y and Z cables from the driver box to the stepper motors.
    AU $1,237.74
    From United States
    AU $78.20 postage
    Customs services and international tracking provided
  • Sherline 1090 - Follower Rest

    It is attached to the lathe saddle and moves as the saddle moves, keeping the point of support directly behind the cutting tool. It is not necessary to drill any mounting holes, and full instructions are provided for use.
    AU $129.35
    From United States
    AU $52.45 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 1040 - 3.1 in 3-Jaw Chuck

    This larger chuck takes up no more center-to-center space than the 2.5″ chuck, but it will hold larger work. With the jaws in the reversed position, work up to 2-3/4″ (70 mm) can be gripped. The hole through the chuck is. 687″ (17 mm).
    AU $258.71
    From United States
    AU $85.93 postage
    Customs services and international tracking provided
    Only 1 left!
  • SHERLINE 4410C-CNC CNC READY LATHE (METRIC) + "C" PACKAGE (INCH SEE 4400C-CNC)

    1191 Live Center. 24″ (610mm) steel bed that has 17″ (431mm) between centers. Each handwheel has laser engraved aluminum handwheel collars. 3007 3-pc 1/4″ HSS Cutting Tool Set (LH, RH, Boring).
    AU $2,139.77
    From United States
    AU $306.58 postage
    Customs services and international tracking provided
    6 watching
  • Sherline Tool Part 12950 Sherline Headstock Riser Block

    AU $70.32
    From United States
    AU $31.91 postage
    Customs services and international tracking provided
  • Sherline Headstock Spindle

    AU $97.76
    From United States
    AU $28.66 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline 5400-DRO INCH Deluxe Mill Oil reservoirs on all axes. (5410-DRO METRIC)

    Special handwheels are supplied with DRO machines. These handwheels can be reset to zero electronically with the push of a button on the DRO display box. Sherline DRO mills are outfitted with the special DRO 2″ (51mm) handwheels on the Y-asix leadscrew and X-axis table feed screw, and a 2.5″ handwheel on the Z-axis vertical feed screw.
    AU $1,686.51
    From United States
    AU $278.17 postage
    Customs services and international tracking provided
  • SHERLINE 4100-C 3.5" X 8" LATHE (METRIC) + the "C" Package (INCH SEE PN 4000C)

    Model 4100 3.5″ x 8″ lathe and standard accessories PLUS Live Center. Swing Over Bed3.50″ (90 mm). 15″ (381mm) steel bed to allow 8″ (203mm) between centers. 3-pc 1/4″ HSS Cutting Tool Set (LH, RH, Boring).
    AU $1,605.93
    From United States
    AU $250.10 postage
    Customs services and international tracking provided
    11 watching
  • Sherline PN 8160- CNC Metric Mill DRO with CNC Thrust Collars

    To install CNC stepper motor mounts on a Sherline machine, you must remove the handwheels.
    AU $571.90
    From United States
    AU $78.93 postage
    Customs services and international tracking provided
  • SHERLINE 4100C-CNC 3.5" X 8" LATHE (METRIC) + "C" Package. (INCH SEE 4000C-CNC)

    Model 4100 3.5″ x 8″ lathe CNC ready and standard accessories PLUS Three standard 1-5/8″ (41mm) laser engraved aluminum handwheels. Each handwheel has laser engraved aluminum handwheel collars. Live Center.
    AU $1,963.78
    From United States
    AU $283.92 postage
    Customs services and international tracking provided
  • Sherline 5800-DRO INCH. Oil reservoirs on all axes.

    Special handwheels are supplied with DRO machines. These handwheels can be reset to zero electronically with the push of a button on the DRO display box. Sherline DRO mills are outfitted with the special DRO 2″ (51mm) handwheels on the Y-axis leadscrew and X-axis table feed screw, and a 2.5″ handwheel on the Z-axis vertical feed screw.
    AU $3,483.17
    From United States
    AU $425.03 postage
    Customs services and international tracking provided
  • Sherline 1035 2.5 in 4-Jaw Independent Chuck

    Like the Sherline 3-jaw chucks, the 4-jaw chucks can be used to clamp either externally or internally. The chuck has a. 687″ (17mm) through hole with a. A hex key (provided) is used to tighten each jaw individually.
    AU $203.27
    From United States
    AU $34.93 postage
    Customs services and international tracking provided
    Only 1 left!
  • Sherline Deluxe WW Collet Set 1162

    A machined wood insert locates each part, plus a drawing in the reminds you where each part goes to keep things organized. WW collet adapter. 3/4″ collet pot chuck. 1″ collet pot chuck.
    AU $425.24
    From United States
    AU $34.54 postage
    Customs services and international tracking provided
  • Sherline 1292 Tailstock Riser Block

    AU $92.40
    From United States
    AU $30.36 postage
    Customs services and international tracking provided
    Only 1 left!
  • gecko g540 4 axis drive 4 taig maxnc sherline cnc lathe mill

    Gecko g540. This drive allows for faster rapids and higher feed rates then many available drives. The all Aluminum USA made enclosure has natural heat sinking capabilities with lots of vent holes (no need for a fan or heatsinks).
    AU $821.30
    From United States
    AU $122.01 postage
    Customs services and international tracking provided

Got one to sell?

Get it in front of 160+ million buyers.

Tell us what you think - opens in new window or tab