StarTech Computer Drive, Storage and Blank Media

The HSB4SATSASBA Removable 4-drive Backplane makes inserting and removing drives fast and easy, by turning three 5.25" bays into a hot-swappable interface for up to four 3.5” SATA or SAS hard drives (HDD).

The adapter enclosure lets you substitute a 3.5" hard drive for a 2.5" SSD/HDD in any application that would typically require a 3.5" drive, such as desktop chassis, backplane, or docking station. The 25SAT35HDD 2.5" to 3.5" hard drive adapter enclosure turns a 2.5" SATA hard drive (HDD) or solid state drive (SSD) into a 3.5" drive.

It lets you leverage the high performance of the latest SSDs and hard drives while alleviating bottlenecks in your data transfers. Create a high-capacity, external data storage solution with support for two 2.5” SSDs/HDDs in a wide range of sizes from 5 to 12.5mm.

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. Get higher external performance by using an M.2 SSD in place of a platter drive, harnessing the full potential of your USB 3.0 computer system.

The adapter enclosure is equipped with hardware RAID to provide improved performance and data redundancy. The enclosure supports both RAID 0 and RAID 1 as well as Spanning, and JBOD, and lets you choose your preferred backup mode by simply adjusting the RAID setting switch.

To ensure all of the data on your drive is protected from unauthorized access, the secure enclosure uses an Advanced Encryption Standard Algorithm (256-bit AES). Once your encryption is set, access to the content is only authorized through a customized PIN that you set and enter using the sleek built-in touchpad.

To ensure all of the data on your drive is protected from unauthorized access, the secure enclosure uses an Advanced Encryption Standard Algorithm (256-bit AES). Once your encryption is set, access to the content is only authorized through a customized PIN that you set and enter using the sleek built-in touchpad.

The dual drive enclosure lets you install two 2.5in SSDs or HDDs (from 5mm to 15mm) to create high capacity external data storage. (See testing results below.). The enclosure supports RAID 0, 1, Spanning, and JBOD, enabling you to choose your preferred backup mode.

Extend the value of this hard drive docking station further with the addition of ourSATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5” or 3.5” IDE hard drive into a SATA hard drive dock.

PC systems: PC systems are covered by a two-year warranty period. You will then be responsible for sending the item back to us. We will take between 1 to 2 weeks after receipt of the faulty unit to process your warranty claim.

StarTech Dual M.2 SATA Enclosure - RAID - USB 3.1 Gen 2 USB C / USB A This dual M.2 SATA enclosure with RAID makes it easy to add ultra-fast, portable external storage to your USB-C™ or USB-A enabled laptop, tablet, smartphone or desktop computer.

The adapter enclosure is equipped with hardware RAID to provide improved performance and data redundancy. The enclosure supports both RAID 0 and RAID 1 as well as Spanning, and JBOD, and lets you choose your preferred backup mode by simply adjusting the RAID setting switch.

The SDOCK2U33EB Dual 2.5/3.5" SATA hard drive docking station lets you dock and swap hard drives from your desktop or laptop computer simultaneously using a single eSATA or USB port. See our UASP testing results below for further details.

The high-speed, high-capacity data storage solution you've been waiting for ?. Now, get the speed and capacity you want in external data storage. This single-drive enclosure for 3.5?. It also provides UASP support for enhanced performance.

Simply remove the silicone sleeve, open the latch to insert your 2.5" drive into the rugged enclosure, and plug the included USB cable into the computer or hub USB port. There are no screws or tools needed.

Using industry-recognized erase modes, you can rest assured that the standalone eraser securely cleans, erases or sanitizes the data from your 2.5” or 3.5” SSD or HDD. Make the most of your SATA drives.

(For added versatility, the hot swap bay can interface with SATA I/II/III and SAS I/II hard drives -- an ideal solution for enterprise system applications. F) Storage Temperature-20?. The HSB4SATSASBA Removable 4-drive Backplane makes inserting and removing drives fast and easy, by turning three 5.25" bays into a hot-swappable interface for up to four 3.5” SATA or SAS hard drives (HDD).

StarTech USB 3.1 HDD Cloner and Dock for 2.5"/3.5" SATA SSD/HDD Duplicate drives quickly, at rates of up to 28GB per minute for SSDs, without having to connect to your computer. This drive duplicator lets you create a sector-by-sector clone of your drive, including partitions and boot sector information, to ensure data integrity and consistency for sensitive operations such as data recovery.

Turn the 3.5” front bay on your desktop computer or server into a hot-swap bay for 2.5" SATA SSD/HDD drives. To safeguard your data, you can lock the drive bay door to prevent unauthorized access to your drive.

(For added versatility, the hard drive bay can interface with SATA I/II/III and SAS I/II hard drives -- an ideal accommodation for enterprise system applications. F) Storage Temperature-20?. The HSB3SATSASBA Removable 3-drive backplane lets you quickly install and hot-swap 3.5" drives from the front of your computer, by turning two 5.25" bays into a hot-swappable interface for you to connect up to three 3.5” SATA or SAS hard drives (HDD).

This USB 3.1 dual-bay drive enclosure makes it easy to add high-capacity, high-performance external data storage to your laptop or desktop computer. With multiple RAID options, you can gain increased storage size, performance, or redundancy.

STARTECH Dual-Bay 2.5” SATA SSD / HDD Rack for 3.5” Bay Trayless - RAID. With multiple RAID options, such as RAID 0, RAID 1, spanning, or JBOD, you can build the data storage solution that works best for you.

The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs. The dual M.2 to SATA adapter supports multiple RAID modes, including RAID 0, 1, or spanning, helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode.

This 4-bay 3.5" SATA/SAS backplane, installed into three standard 5.25” front drive bays, makes it easy to swap 3.5” SATA or SAS drives in and out of your server or desktop computer. With its durable plastic and aluminum construction, it provides a cost-effective solution for drive maintenance and interchangeability of data between multiple systems.

StarTech eSATA/USB 3.0 to 2x 3.5" SATA Hard Drive Enclosure w/ UASP The S352BU33RER 2-Bay RAID enclosure lets you build an external RAID array with two 3.5” SATA hard drives, and connect to your computer through USB 3.0 or eSATA.

StarTech USB 3.0 to M.2 SATA External SSD Enclosure with UASP The SM2NGFFMBU33 external USB 3.0 to M.2 (NGFF) enclosure turns your SATA M.2 solid state drive into a portable, high speed USB 3.0 drive.

StarTech USB 3.0 / eSATA 2.5/3.5" SATA III Hard Drive Duplicator Dock The SDOCK2U33RE Dual 2.5/3.5" SATA HDD/SSD duplicator dock lets you duplicate/clone an existing hard drive without the use of a host computer system -- or dock and swap drives from your desktop or laptop computer simultaneously, using a single USB or eSATA port.

The dual mSATA enclosure also provides RAID functionality for increased capacity, improved performance, or data redundancy. Access your external data at greater speeds Quickly access, transfer and back up your files.

The dock's vertical drive insertion makes it easy to dock and swap drives from your desktop computer or laptop. You simply insert your SSD or HDD into the drive slot at the top of the docking station, with no tools or trays required.

The HSB4SATSASBA Removable 4-drive Backplane makes inserting and removing drives fast and easy, by turning three 5.25" bays into a hot-swappable interface for up to four 3.5” SATA or SAS hard drives (HDD).

Boost system speed and performance by adding a PCIe M.2 SSD to your PC. If any of the above item(s) is not included, we reserve the right to reject your DOA claim. You will then be responsible for sending the item back to us.

It supports both 2.5?. form factors for solid-state and hard drives, with a high drive capacity of 6TB. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers.

StarTech 2-Bay 2.5 to 3.5 SATA SSD/HDD Adapter Enclosure w/ RAID This unique dual-bay adapter enclosure gives you an easy and cost-effective way to upgrade legacy systems such as desktop PCs and servers, by letting you install two 2.5" solid-state drives or hard drives into a single 3.5" drive bay.

One high performance storage solution to support two SSD or HDD drives. Create a powerful external USB 3.0 storage solution, supporting two 2.5" SSD or HDD drives. PC systems: PC systems are covered by a two-year warranty period.

Dual mSATA RAID enclosure supports mSATA and mSATA Mini (full-height and half-height mSATA drives). This dual-slot drive enclosure for mSATA and mSATA mini drives makes it easy to add ultra-fast, portable external storage to your USB-C™ or USB-A enabled laptop, tablet or desktop computer.

The SATDOCK5U3ER Hard Drive Duplicator & Docking Station lets you clone a 2.5in or 3.5in SATA hard drive (HDD) or solid-state drive (SSD) to five other SATA drives simultaneously, as a standalone device.

This 4-bay 3.5" SATA/SAS backplane, installed into three standard 5.25” front drive bays, makes it easy to swap 3.5” SATA or SAS drives in and out of your server or desktop computer. With its durable plastic and aluminum construction, it provides a cost-effective solution for drive maintenance and interchangeability of data between multiple systems.

StarTech USB 3.0 to 2.5 / 3.5in SATA HDD Duplicator Dock and Eraser The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed.

USB 3.0 to 2.5/3.5in SATA Hard Drive Docking Station and Standalone HDD/SSD Duplicator - Standalone SATA HDD/SSD Docking Station Hard Drive Cloner - External Hard Drive Dock. This code covers Region Coding.

StarTech eSATA/USB 3.0 Dual 2.5/3.5" SATA SSD/HDD Dock with UASP The SDOCK2U33EB Dual 2.5/3.5" SATA hard drive docking station lets you dock and swap hard drives from your desktop or laptop computer simultaneously using a single eSATA or USB port.

Large data capacity with four drive bays Access multiple drives with this quad-bay docking station. SATA hard drives or solid-state drives. Versatile connection options with fast data transfers You can connect the docking station through either eSATA or USB.

USB 3.0 Standalone Eraser Dock for 2.5in & 3.5 SATA SSD/HDD Drives - Secure Drive Erase with Receipt Printing - 9 Drive Erase Modes including Secure Erase - Supports drive hot-swap. As soon as we find out the status, we will let you know.

Help & Support. These accessories may not work in your Country. As soon as we find out the status, we will let you know. Depending on availability and your location. The Caribbean. New Zealand. This code covers.

StarTech 2.5" SSD/HDD two-bay enclosure for 5 - 15mm drives with RAID This USB 3.0 2-bay enclosure for 2.5in drives gives you the performance you want in an external storage system - and features a stylish, compact design that looks great next to your Mac or PC.

Add high-speed data storage to your laptop or desktop computer, with this portable mSATA and mSATA Mini drive enclosure. The mSATA drive enclosure also supports UASP for enhanced performance. This portable drive enclosure is compatible with all standard mSATA drives, including the mSATA Mini (Half-Size) form factor.

It supports both 2.5?. form factor solid-state and hard drives, with a high capacity storage capability of 12TB (6TB per drive). It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers.

Simply install the drive bay into a 5.25in bay on the host computer, then mount a 3.5in SATA HDD into the (removable) caddy. Connecting the SATA hard drive to the computer is as easy as inserting the caddy into the drive bay, which can be locked to prevent unauthorized removal of the drive.

This single drive enclosure for 2.5?. The enclosure is powered directly from the USB port, with no external power required, so there's no need to carry along an adapter. The USB Type-C connector is small and reversible, which makes for easier insertions.