TV Signal Finders

Satking SK2500A High Definition Terrestrial TV Meter for Installers OZ Warranty.

Digital TV Signal Finder 12MM-DF02. the cable should be rg6 but rg 59 is fine. no loose connections, 1 piece of copper wire shorting can cause problems.

Such a relief. Special Note: All VAST services are MPEG4, there are no VAST MPEG2 services. Built in Compass. VAST Compliant. Signal buzzer. Signal Too Noise Display. Signal Level: 25 to -65dBm. Symbol Range 2-45,000.

Features:LCD display shows the strength of the signal clearly. Meter with audio tone helps you to align the satellite antenna to signal .Audio signal gets louder at the best setting.Connect to your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.Make adjustments by yourself and won't need other people's help.Works with multiple dish systems.Easily setup satellite dishes on RVs.Easy and quick operation. Descriptions:Built-in buzzer.With four steps gain for the satellite signal, you can increase or decrease the gain of the meterWith back holder design, very convenient for use.Specifications:Color: grayMaterial: plasticFrequency range: 950-2150MHzPower Supply:13-18V DC Model: Applicable:unive.

Fully DVB compliant:Yes. Live FTA Digital Picture and Sound. Fully DVB Compliant. Fully DVB compliant. Digital tuner input. Signal lever:-65dBm~-25dBm. LNB/Tuner input 3.5" LCD color display.

Package Includes: 1 x WS-6906 Satellite Finder 1 x Black Protective Bag 1 x Strap 1 x USB Upgrade Cable 1 x Car Charger 1 x Power Adapter 1 x AV Cable 1 x English User Manual.

The Satink WS-6933 is the perfect solution. The unit is defaulted to the 12647/V/30000/3/5 VAST homing transponder on Optus C1/D3 ready. ￭Sound and Light Alarm for Locking Signal. Signal Input Level: – 65 to -25 dBm.

Via a DC power inserter. Make sure the power inserter is positioned between the finder and the antenna. Remove the finder and replace any amplifier that was disconnected. 1 x TV Signal Finder. Higher up the scale gives a better.

Features: Elegant exterior and convenient to carry. Easy to operate. Left  port connect antenna cable, right port connect power cable, Powered by 9V battery or 6*AA battery, satellite finder will start to work. Feedback numbers shows the strength of the signal intuitively. Variable sensitivity adjustment to work with TV both towers from near and far. Indicator dial carry with compass can help you indicates the direction. DVB-T Signal Finder TV Antenna more convenient meter to locate the satellite signal.   Installations:.

  As an outstanding manufacturer, Our Goal is let our customer 100% Satisfied   We seriously promise:    1.We will provide No Hassle Return service if you are not satisfied   2.We are Completely Responsible for all missing and damage caused in transit.   3.Our Customer Service will reply your questions within 24 hours   4.We are responsible for the Return Shipping Postage of the Quality Problem    It is our Lucky that this listing was viewed by you ,hope you can give us your trust and buy it confidently, We will provide more excellent service than you expect.  .

ATT increasing key. Built-in signal alert buzzer. it can easily be attenuated by enabling this "attenuation" funtion, it reduces the incoming signal to a lower level. There are four step attenuation totally.

Features: No need to input transponder frequency, symbol rate, or polarity. This meter is truly plug & play. Compass with attenuation control function easily locate satellite signal. Eco-friendly Material, in-line IF signal strength meter. Connect to your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to. Numbers feedback displays signal strength intuitively. Variable sensitivity adjustment to work with TV towers both near and far. Excellent sensitivity and portable with a small size. Specifications: Model: SF07 Color: blue Material: plastic Frequency range: 950-2150MHz.

Remove the finder and replace any amplifier that was disconnected. via a DC power inserter. Make sure the power inserter is positioned between the finder and the antenna. external amplifier that may be connected to the antenna.

System Capabilities Fully DVB Compliant Yes. 3.5" LCD color display. Signal Level -65dBm~-25dBm. LNB/Tuner Input Connector F type female. Support language: English, French, Farsi, Russian, Arabic, Portuguese, and Turkish.

Higher up the scale gives a better signal. Make sure the power inserter is positioned between the finder and the antenna. Remove the finder and replace any amplifier that was disconnected. Remove any external amplifier that may be connected to the antenna.

Symbol Rate: 2＜Rs＜45Mband(SCPC/MCPC). Input Frequency: 950~2150MHz. Input Level: -65~ -25dBm. Output: DC 12V/ 1A. Input: 100-240V AC, 50/60Hz. Active Area (WxH): 36.72x48.96mm². Power Consumption: MAX.

Features: In-Line IF signal strength meter,75Ω connector,Built-In light & electric buzzer. Built in Compass;Ideal for satellite installations or to re-point your satellite dish. SF-95DR has a blue back light to allow use at night. The signal meter never needs to be recalibrated nor does it need complicated programming. ATT increasing key. If the incoming signal is too strong,.

UNIT IS AS NEW - i PREFERRED THE OLD ANALOGUE UNIT SO THIS DO LITTLE WORK.

Smallest and fastest digital terrestrial finder. Automatically identify DVB T and T2 signals. 1 SH-110HD SAT Finder. Signal quality indication bar. Signal lock prompt audio tone. Input Level: -85~-20dBm.

Packing Includes: 1x Digital satellite meter 1x User Manual 1x AV Cable 1x Car Charger Cable 1x AU Adapter 1x Carrying Bag 1x Strap of Carrying Bag.

Being MPEG 4 the unit can display a live TV of both SD and HD channels. The unit has a built in high power 3000mAH battery that you can do plenty of jobs without re-charging. DVBT Technical Specifications.

LCD Type: TFT Positive transflective. 1 x Power Adapter. Active Area (WxH): 36.72x48.96mm². We will be. Input: 100-240V AC, 50/60Hz. none receive. 1 x User Manual. 1 x Lanyard.

Via a DC power inserter. Make sure the power inserter is positioned between the finder and the antenna. Remove the finder and replace any amplifier that was disconnected. 1 x TV Signal Finder. Higher up the scale gives a better.

The unit has a built in high power battery so the unit does not need to be connected to the VAST receiver to be used. Unlike many other lower priced Finders on the market this Finder you can actually receive VAST transponders.

Features: In-Line IF signal strength meter,75 Brand Unbranded MPN Does Not Apply UPC 877093094663 Size 130*65*27mm Frequency Range 950-2150MHz Input level Range -40-10dBm Impedance 75 Power Supply 13-18V DC Operating Temperature 040 Model SF-95DR Model SF-95DR.

Features:No need to input transponder frequency, symbol rate, or polarity. This meter is truly plug & play.Compass with attenuation control function easily locate satellite signal. Eco-friendly Material, in-line IF signal strength meter. Connect to your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.Numbers feedback displays signal strength intuitively.Variable sensitivity adjustment to work with TV towers both near and far.Excellent sensitivity and portable with a small size. Descriptions:The signal meter never needs to be recalibrated nor does it need complicated programming.  Great for remote satellite antennas. Corrosion-resistant connectors. Make adjustments by yourself and won'.

This is a great professional digital TV signal finder with excellent sensitivity. With backlight function, you can use this digital DVB-T finder at night. 1 x DVB-T Signal Finder. Create a digital TV Era for you to enjoy a happy life.

New - Not required - comes in original box Bargain at $240

No external power or batteries required. Ease of use. Internal 22 Khz indicator light. Input Frequency: 950 MHz - 2150 MHz.

Find That Signal ! SAT InputVisual/Audio Indication Only. 4 LED's54 (72) dBµV Optimum signal. Easy to use, compact design. 5 LED's59 (75) dBµV Optimum signal. 6 LED's61 (78) dBµV Optimum signal. 7 LED's64 (81) dBµV Optimum signal.

Brand new Satellite Dish direct from the supplier. Never been opened or used.

The TV dish can be disassembled to help with transportation.

Fully DVB compliant:Yes. Display the signal strength in percent and as a bar. Acoustic signal when a transponder is locked. Reception and playback of DVB-S Free to Air Radio Programs. Automatic Channel Search TV Radio.

Features:It is one of the most useful tools that you might have to configure your plate. This device is connected between the parabolic antenna.And its receptor and allows you to find the satellite, without having to use the meter on your TV. This can be invaluable.When you are trying to set up your plate in a tripod too far.It provides a tone rising as the signal strength, go upstairs and a meter lit for night use.Descriptions:No batteries are required to use the gauge; it is fed by the receiver, built in light and bell electric.2150 MHz input frequency 950.Sepification:power source 13 -18V DCFREQ: 950-2150MHzColor: blackSize: 79*61*35mmModel: GSF-9502Single package:1 x Satellite Finder    Color black FREQ 950 Fun.

This is a great professional digital TV signal finder with excellent sensitivity. With backlight function, you can use this digital DVB-T finder at night. 1 x DVB-T Signal Finder. Create a digital TV Era for you to enjoy a happy life.

Fully DVB compliant ，Live FTA Digital Picture and Sound. - System capabilities:Full HD DVB-S/S2 Complian, Fully DVB compliant. - OSD Color:16-bit OSD with anti-flickering. 1 Power Adaptor. 1 AV cable.

SatKing SK-9000 Features. Satking SK-9000 Power. 4.3" HD Colour LCD screen. • Can be used as a compact TV if you add a TV Antenna. Can be used as a compact TV with antenna. • 4.3" colour LCD screen. • 3.5mm AV output.

Fully DVB compliant，Live FTA Digital Picture and Sound. System capabilities: Full HD DVB-S/S2 Complian, Fully DVB compliant. Channels Number 6000 channels TV and Radio programmable. HDMI HDMI(up to 1080P) output.

LED's Power1 x Red Power Indicator. Battery Used (TV)50mA at 9V Power from B6F22 Battery. Input LevelTV 50 ∼ 80dBµV/50 ∼ 90dBµV/10dB Step. Switching Buttons PowerPower On/Off.

Being MPEG 4 the unit can display a live HD TVchannels. 3000mAH Lithium Ion battery insures you can do plenty ofjobs without re-charging. HDMI output for testing cable runs to your TV. Our sales staff and products are always close at hand.

Ease of use. No external power or batteries required. Input Frequency: 950 MHz 2150 MHz.