Valves & Manifolds

AU WAREHOUSE -TOTAL 10% Sales. AU Warehouse-Fast Local. This is a normally close type electric solenoid valve, power on to open it and power off to close it. 1 x Solenoid Valve. The high quality brass valve body would hold a pressure up to 0.8Mpa.

1" Valve Solenoid 12VDC ATS 5200.30 8VA. Valve Type - Normally Closed. Filter - Acetal. Application Area - Liquid, Gas & Light Oil. Body - 30%Glass Filled Nylon. Temperature Range - 2°C - 60°C (Ambient).

Hansen Max Flo Trough &Tank Level Valve - 25mm with 20mm adapter. • Diaphragm Valve is supplied with: Glass Fibre Reinforced Nylon Complete Valve Body, 20mm and 25mm Self Seal Adaptor, Adjustable Extension Arm, 100mm Blue Flanged Float and 600mm Cord.

This is a normally close type electric solenoid valve, power on to open it and power off to close it. 1 x Solenoid Valve. Adapter Cable. The high quality brass valve body would hold a pressure up to 0.8Mpa.

Valve stays close when the coil is de-energized, and it opens when energized. -DC 12V 1 /2inquick connect solenoid valve. - Type:Ordinary temperature normally closed, two way solenoid valve. - Material: Brass.

3/4" Valve Solenoid 12VDC ATS 5200.30 8VA. Valve Type - Normally Closed. Filter - Acetal. Application Area - Liquid, Gas & Light Oil. Body - 30%Glass Filled Nylon. Temperature Range - 2°C - 60°C (Ambient).

Lay Flat Hose. The new design features afloat and weighted ball that enables the user to set the valve to open at the minimum fluid level and close at the maximum fluid level. Punch out anti-syphon holes for multi tank filling or diffuser installations.

Model: DN20. 1 x DN20 3/4" Brass Water Pressure Reducing Valve. -Pressure reducing valve was use of full brass material, using piston-type structure. -Especially suitable for branch pipe vacuum system.

Relief Valves. PICK UP OPTION. © Pipe Co WA.

One BSP female end and one BSP male threaded end, PTFE seat and NBR O-ring gland. Low torque allows for easy operation. 1/4" BSP, PTFE seat, NBR O-ring gland. Size (BSP). Size 1/4" BSP. Pressure Gauges Ball Valves Brass Fittings Globe Valves Gate Valves Flow Switches Stainless Fittings Butterfly Valves Strainers Check Valves Other.

NEW Valve Richdel 25 mm 2400MT Richdel- Irritrol Series. NEW Valve Richdel 25 mm 2400MT. Richdel- Irritrol Series. PICK UP OPTION. © Pipe Co WA.

NEW Check Valve Spring Brass 25mm 1" Female BSP. Size: 1" or 25mm Bsp female threads.

1/2" Male Inlet x 1/2" Female Outlet Solenoid Valve 12VDC 7W ATS 5200.30. Valve Type - Normally Closed. Filter - Acetal. Application Area - Liquid, Gas & Light Oil. Made in Australia. Body - 30%Glass Filled Nylon.

A spring-assisted in-line check valve uses a disc fitted with a valve seat and pressed into place by a spring. That allows water to flow in one direction. Because the spring is a constant pressure, it closes the valve as the pressure lessens.

1 x Mini Solenoid Electromagnet. Suction Stroke: 9mm. Cable Length: approx. Easy to use.

Port: DN15 G1/2. Ball valve and actuator for nut connection Installation, quick disassembly. 1 x Motorized Ball Valve. Valve body connection: ZG inner pipe thread. Power consumption: ≤ 7.5VA. Valve body: brass (forged).

The three male thread connectors are respectively for tube connecting, air pressure tank and compressor piston pump. 1 x 3-Port Male Thread Air Compressor Check Valve. Suitable For: Direct air compressor.

NEW Valve Richdel FC Series 217, 50 mm Richdel- Irritrol Series. Richdel- Irritrol Series. NEW Valve Richdel FC Series 217, 50 mm. PICK UP OPTION. © Pipe Co WA.

2 X Stokes 50mm / 2" Ball Valves (Stainless). 3 X 2" / 50mm Ball Valves. 1 X Dura 50mm / 2" Ball Valves.

Type: Vertical Type. Material: Brass (body), stainless steel (Spring). Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

Specifications: Voltage: DC 12V Pipe size: 1/2" Flow bore: 16mm Working Pressure: 0~0.7Mpa(100PSI) Type: Normal closed Thread type: NPT Ports: 1/2" NPT Inlet and Outlet Ports Usage: water, air, low viscosity fluids(Below 20cst).

HANSEN LEVELLER VALVE. The maximum level is set by the position of the top float on the valve arm allowing for maximum use of the tanks height. The minimum water level is set by adjusting the length of the cord between the top float and bottom weighted float.

ALL VALVES PRESSURE TESTED DURING PRODUCTION.

Model: DN15. 1 x DN15 1/2" Brass Water Pressure Reducing Valve. -Pressure reducing valve was use of full brass material, using piston-type structure. -Especially suitable for branch pipe vacuum system.

Used to tighten oil, water, gas hose and other hose interface. 1 x 3-Way Shut Off Ball Valve. Size: 5/16" 8mm. Valve material: brass plastic. Easy to install. Clamp material: stainless steel. Color: as shown in picture.

Features: Acting Motion:Direct action Working Medium:Air,Water,Oil State:Normally closed Operating Type:Directly driven Pipe Size:1/4" Orifice:2.

Product features This is a normally close type electric solenoid valve, power on to open it and power off to close it Can keep the constant current steady flow, prevent the dry burning and monitoring the flow Pressure regulating valve (steady flow valve) function similar to water flow switch This electric solenoid valve is all brass casting structure, precise and reliable Suitable for use with pipelines in water supply applications     Product description.

Note: The color of the item may vary slightly due to photography and your own computer It is wear-resisting Excellent anti-rust anti-fouling properties Suitable for compressed air, water, oil and other media Specifications: Pipe Size: 1/4" Working Temprature: -20≤t≤150 Centigrade Total Length: 46mm/1.81" Material: Brass Package included: 1 x Brass Ball Valve Brand Unbranded MPN Does not apply UPC Does not apply Manufacturer Part Number Does not apply Classification103 upsku10304413.

1" BSP Threaded 25mm Brass Gate Valve. Size 1" BSP. Pressure Gauges Ball Valves Brass Fittings Globe Valves Gate Valves Flow Switches Stainless Fittings Butterfly Valves Strainers Check Valves Other.

Max Flo 25mm with 20mm adapter. Suitable for Side, Bottom and Top entry. Lay Flat Hose. Mini body design to enable easy installation. With our sound knowledge of irrigation products we can help you with the right products for your next irrigation project.

NEW Valve Richdel SC 25 mm 204MT Richdel- Irritrol Series. NEW Valve Richdel SC 25 mm 204MT. Richdel- Irritrol Series. PICK UP OPTION. © Pipe Co WA.

This solenoid valve not only can keep the constant current steady flow, but also prevent the dry burning and monitoring the flow. Type: Guide (One-way) Solenoid Valve. Pressure regulating valve (steady flow valve) function similar to water flow switch.