Wilwood

Wilwood 260-8419 Brake Bias / Proportioning Valve. Valves weigh only 5.2 ounces and have two. 25” side mounting holes spaced 1.00” apart. Standard in and out ports are 1/8-27 NPT. Proportioning Valve Finish: Natural.

8:30 am - 1:00 pm. 8:30 am - 5:30 pm. Epping VIC 3076, Australia. 122-128 Cooper St.

These pedal mount assemblies are made from lightweight aluminum and are designed for easy mounting. All of them feature lightweight, comfortable ergonomics and non-slip footpads with a protective coating.

Combination Proportioning Valve. SIMPLE & EASY. 8:30 am - 1:00 pm. 8:30 am - 5:30 pm. Epping VIC 3076, Australia. 122-128 Cooper St.

Good restorable condition. Suitable for race car or fast street car.

Wilwood machines each proportioning valve from billet aluminum and gives it a durable anodized finish. Wilwood Disc Brakes. Proportioning Valve Finish: Natural. Proportioning Valve Material: Aluminum.

Wilwood’s new Adjustable Reverse Mount Pedal assembly mounts two brake master cylinders with a bias balance bar and positions the master cylinders inside the firewall and away from engine heat. forged aluminum pedal arms with ladder style construction.

Representative Image Only. 8:30 am - 1:00 pm. 8:30 am - 5:30 pm. Epping VIC 3076, Australia. 122-128 Cooper St.

Knob Style Proportioning Valve with 1/8-27 NPT Inlets Also Includes Tube Nut Adapters for Installation of 3/8" Tubing. Valves weigh only 5.2 ounces (knob), 6.1 ounces (lever), and have two. 25" side mounting holes spaced 1.00" apart.

Wilwood Front Disc Brake Kit Superlite 6-Piston Black 140-10220-D to suit 1969 Mustang. Went a different direction with my front end so no longer required.

The combination block maintains full isolation between front and rear fluid circuits and can be used in conjunction with any tandem outlet or dual mount master cylinder assemblies. The rear circuit has a single inlet and single outlet with the adjustable proportioning valve.

The combination block maintains full isolation between front and rear fluid circuits and can be used in conjunction with any tandem outlet or dual mount master cylinder assemblies. The rear circuit has a single inlet and single outlet with the adjustable proportioning valve.

Specifically designed to work in conjunction with Wilwood Aluminum Tandem Master Cylinders (P/N 260-8555; 260-8556; 260-9439; 260-12900 or 260-13375); in manual or boosted system applications. Stainless steel fluid tubes are precision bent with preinstalled stainless tube nuts for a simple bolt-on installation between the Combination roportioning Valve and the Wilwood Tandem Master Cylinder.

Wilwood Disc Brakes. Wilwood manufactures a wide variety of brake line fittings and adapters from materials such as steel, brass, and aluminum. Most of the fittings and adapters are universal. Just select the sizes you need to complete your brake line project.

4 Piston Lug Mount Forged Billet Dynalite Caliper (Black). 1.38"/1.38" Bore Size, 0.81" Disc Width, 7112 Pad Plate. Bank: Westpac Bank – Five Dock. Finished in black anodise for a long lasting durable finish.

Wilwood's tandem chamber master cylinders are fully machined from a High-pressure die casting of a premium alloy, it incorporates slotted mounting flange to accommodate mount centres between 3.22" to 3.40" and also features side-hole mounts on 6.40" centres Master cylinder is has full separation between the front and rear chambers.

Quantity:1 X Proportioning Valve As Pictured. KNOB STYLE PROPORTIONING VALVE. 1 X PROPORTIONING VALVE AS PICTURED. ENGINE PARTS AUSTRALIA. Valves weigh only 5.2 ounces (knob), 6.1 ounces (lever), and have two. 25" side mounting holes spaced 1.00" apart.

For pedal box Gu-340-3950. For clutch Gp-340-1290.

Holden Gemini. Holden WB. Holden HQ-HZ. Holden HK-HG. Holden HD-HR. Holden EJ-EH. Holden FE-EK. Ford XD-XE.

7/8" Combination Remote Master Cylinder Kit (1.2 Stroke). Product image(s) are for illustration purposes only. Actual product may vary.

This swinging mount pedal assembly mounts a single brake or clutch master cylinder in a reverse position inside the firewall. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary.

High-pressure die casting of a premium alloy produces a high-capacity body that is lightweight, looks great, and has the durability for competition. Tandem 1.100" Stroke 0.938" Bore Master Cylinder Kit.

These 2 lb. valves are used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers--in other words, where fluid drainback occurs, causing excessive brake drag.

2 Piston - 3.75" Lug Mount DynaPro Single Caliper, Long Piston. 1.75"/1.75 Bore Size, 0.19" Disc Width, 6812 Pad Plate. Four corner bleed screws allow the caliper to be mounted in any front, rear, right, or left position.

The 1-1/8” bore is designed for use primarily with power brake applications, either from vacuum assist or hydraulic assist systems. Machined from high-pressure die castings, each master cylinder weighs only 3lbs, a 75% weight savings over most cast iron OE type master cylinders.

High-pressure die casting of a premium alloy produces a high-capacity body that is lightweight, looks great, and has the durability for competition. Tandem 1.125" Bore 1.100" Stroke Fluid Tubes Master Cylinder Kit.

SIMPLE & EASY. Representative Image Only. 8:30 am - 1:00 pm. 8:30 am - 5:30 pm. Epping VIC 3076, Australia. 122-128 Cooper St.

Holden HQ To WB STD Rotor Kit Boot Red Inc Pads With Bracket (Pair) Caliperdust. These caliper kits have been designed to make it possible to upgrade your early Holden brakes while retaining the factory HQ-HZ Discs & stub axles and being ADR compliant.

Wilwood's new Billet Aluminum Master Cylinder Fluid Reservoir w/ bracket provides a stylish and durable 4 ounce capacity reservoir that is manufactured from billet aluminum. These reservoirs kits are intended be used as remote mount reservoir utilizing the included mounting bracket and the 3/8-24 thread -3 AN fluid connector adapter.

The strength of the Powerlites is a combination of process and design. This eliminates the stresses and interruptions to the internal grain structure that occur when machining a straight block billet.

They utilize standard OEM internal components for dependable performance at an affordable price. They are available with or without large-capacity plastic reservoir and dual outlet bores for responsive performance.

Holden HQ-WB & Torana LC-UC Black Caliper w/Black Drilled Rotor ADR Approved Dust Boot Brake Kit. These bolt on brake kits have been designed to make it possible to upgrade your early Holden brakes while retaining the factory stub axles and being ADR compliant.

These Wilwood compact remote side mount clutch master cylinder kits have been designed to work with limited-space applications that still require the output capacity of a full size master cylinder. Their design incorporates integral side mounting lugs and no traditional mounting flange, which further enhances their ability to mount in tight spaces.

They are available with either a 4 oz. or 10.7 oz. section of rubber hose, and the aluminum fittings necessary for installation. Choose your Wilwood remote reservoir kits in either a universal or non-integral compact master cylinder fit.

High-pressure die casting of a premium alloy produces a high-capacity body that is lightweight, looks great, and has the durability for competition. Alloy Natural Dual 4 OZ. Plastic Bowls Master Cylinder.

Forged Clutch 7:1 3/4" M/C Slave Cylinder Swing Mount Pedal Kit. - Pedal kit, contains 260-1304 Master Cylinder and 260-1333 Slave cylinder. - Desc 2: SLAVE CYLINDER,SWING MOUNT. - Desc 1: PEDAL KIT,FORGED,CLUTCH,7:1,3/4in.,M/C.

Made from billet aluminum for high strength, and plated with a tough anti-corrosion finish, the cylinders are pull-types and have a stainless steel pushrod. Universal Aluminum Black Pull-Style 11 3/4" Extended 1 3/8" Stroke Slave Cylinder.

Wilwood’s 7/8" or 15/16" bore Tandem Aluminum Master Cylinders available in 3 finishes, plain, ball burnished, and black e-coat. These master cylinders are designed primarily for manual applications and include a pushrod.

Forged Dynalites are the strongest calipers in their class. This process eliminates the breaks and interruptions to the internal grain structure that occur when machining a straight block billet. The bottom line is a taller pedal and better stopping power.

Wilwood’s 7/8" or 15/16" bore Tandem Aluminum Master Cylinders available in 3 finishes, plain, ball burnished, and black e-coat. These master cylinders are designed primarily for manual applications and include a pushrod.

High-pressure die casting of a premium alloy produces a high-capacity body that is lightweight, looks great, and has the durability for competition. Tandem Aluminum Natural 0.875" Bore Fluid Tubes Master Cylinder Kit.

Willwood Master Cylinder or Calipers Tube Adapter. 1/8" NPT to 3/8"-24 (4pk).

These pedal mount assemblies are made from lightweight aluminum and are designed for easy mounting. All of them feature lightweight, comfortable ergonomics and non-slip footpads with a protective coating.

Traditional non-ABS spindle vehicles benefit from the combination of Wilwood forged billet 6-piston DynaPro calipers and your choice of high performance rotors (including their SRP drilled and slotted with E-coat) and Smart Pad brake pads.

Billet Remote Reservoir Kit. These are your responsibility and will need to be paid when you collect your goods.

These Wilwood combination remote mount clutch master cylinder kits are Precision-machined from high-strength aluminum. Universal Aluminum Natural. 750" Bore Master Cylinder Kit. P.O Boxes are not accepted.