 |
In my opinion the teeth of the cutters are a degree too soft for thin metal, but fine for wood . J.L.
Verified purchase: Yes | Condition: New
I used it to cut 3 holes in some mdf, it wasn't good at all and it broke after doing the 3 holes. As you can see by the picture the metal connection is weak and the drill part has dug into the hole saw part. I would not recommend buying this at all it is definitely cheap and nasty, looks all nice in the case and that but its only good for one job
Verified purchase: Yes | Condition: New
While this item appears to be of excellent quality and good value for money I would only use it where it will not be put to the test. I have kept it as a standby as when the largest saw was used to drill holes in an office desk, it was blunt after the first hole. I found that I had to pay twice the price of this set for a good single hole saw.
Verified purchase: Yes | Condition: New
This hole-saw set is great value for money. I used it for cutting holes in plywood and MDF. I used the holes and the resulting plugs to good effect! This is not a professional tool, but for occasional home use it is very effective. Do not run it too fast when cutting metal and use coolant/lubricant if possible to avoid drawing the temper of the teeth.
Verified purchase: Yes | Condition: New
did the job i bought it for, just wish saws were deeper,but i just did the job by going down to depth ,cutting off and went deeper untill i was through.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
