For the price it’s good but I broke the hook straight away.The pin puller works fine and is as good as any high priced puller.I have made a new stronger hook and it now good .
Verified purchase: Yes | Condition: New
Don't even bother wasting your money. It looks all well and good until you use it, and the metal hook at the end can't handle the actual sliding hammer! As soon as you go to hook it under a wheel arch to pull a dent, the metal hook at the end is pretty much made out of tin foil, christ even tin foil would be stronger, tin foil would last longer. Either way I've now had to fabricate my own hook considering silver line can't do it properly...
Verified purchase: Yes | Condition: New
Great idea and works to its intended use only bad side is the plastic handle strips its threads within a few hits. I used some PTFE tape and works to a reasonable standard but could be a better design from box ie. Metal handle with a rubber grip
Verified purchase: Yes | Condition: New
Used once, the handle sold of the end making it all but useless and unable to do the job it was designed for. Poor quality. Would not recommend it. The screws used to screw into the dent to pull out wore out after one use and the thread pulled after only a few slides. Of the hammer. They would probably have pulled out sooner but the end handle kept slipping preventing the hammer from being pulled back as designed.
Verified purchase: Yes | Condition: New
It's a 19mm nut thread M?mm the slide end hits onto the actual nut so in time the threads will go there is no proper stopper for the hammer. So I've put on 3 nuts and removed the large washer as not enough thread for the plastic thread handle. Also wrong size too small thread for my driveshaft attachment puller.
Verified purchase: Yes | Condition: New