Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Base Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Base Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Classic Standard Cab Pickup 2-Door
4.1L 250Cu. In. l6 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Classic Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Classic Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Conquista Standard Cab Pickup 2-Door
4.1L 250Cu. In. l6 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Conquista Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Conquista Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
SS Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
SS Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
4.9L 301Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
5.7L 5733CC 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
6.6L 400Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
6.6L 403Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
4.9L 301Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
5.7L 5733CC 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
6.6L 400Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
Portions of the information contained in this table have been provided by skidauto
PO Box, APO/FPO, Alaska/Hawaii, Barbados, French Guiana, French Polynesia, Guadeloupe, Libya, Martinique, New Caledonia, Reunion, Russian Federation, US Protectorates, Ukraine, Venezuela
Postage and handling
To
Service
Delivery*See delivery notes
Free postage
United States
Standard postage (FedEx Ground or FedEx Home Delivery®)
Free 4 day postageGet it between Wed, 5 Jun and Fri, 7 Jun to 43230
Handling time
Will usually post within 1 business day of receiving cleared payment.
Taxes
Seller charges sales tax in
Sales tax for an item #164057843693
Sales tax for an item #164057843693
Seller collects sales tax for items posted to the following states:
State
Sales tax rate
Return policy
Item must be returned within
30 days after the buyer receives it
The buyer is responsible for return postage costs.
Refunds by law: In Australia, consumers have a legal right to obtain a refund from a business if the goods purchased are faulty, not fit for purpose or don't match the seller's description. More information at returnsreturns - opens in a new window or tab.
Seller does not respond to messages at all. The headers i received were not chrome plated as shown in the photos and description. Huge disappointment. I would not buy from this company again.
Great seller, Fast shipping & would do business with again AAA+++!!!
XS Power have updated their 551 adapters, but it still has problems (NO FAULT TO THE SELLER!). Adapters now fits correctly (vs. older design) but for some dumb reason XS Power has created a HUGE recess for the side post between the plastic ridge and aluminum threaded plate (see photo). XS Power includes a small washer to take up SOME gap but its not enough, need thicker spacers or grind plastic down.
I have used the Pypes X-Pipe kits on a number of cars. Good product at a good price, never disappointed.I have used the Pypes X-Pipe kits on a number of cars. Good product at a good price, never disappointed.