Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Tools
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Tools
Seems well made and hardened steel. No problem removing my BB. Can't comment on long term durability as so new. ISIS type.
Verified purchase: Yes | Condition: New
Bought this to fit a new Shimano UN55 bottom bracket, but it just doesn't fit. It just about managed to remove the original RPM bottom bracket, but only because it wasn't screwed in that tight. I managed to screw in the new bracket, after tapping the tool in with a soft hammer, but it just wouldn't grip the cup which screws in on the left hand side. I had to use the cup from the old bottom bracket, which is not ideal. Using vernier calipers, I measured the tool dimensions against the bottom bracket, and found that the fingers on the tool are just too fat to engage with the grooves in the bracket. It could be that the extra thickness of the coating makes it over-sized. I may try removing the coating with a wire brush to see if it makes a difference, but I wouldn't expect to have to do any re-work to make it usable. As it is, the tool just doesn't penetrate far enough into the splines to be able to apply any torque with confidence. The danger is that the tool slips out and rounds off the edges of the splines, making it even harder to remove. I'd say that the width of the teeth need to be reduced by about 0.15 to 0.20 mm to make it fit properly.Read full review
Verified purchase: Yes | Condition: New
Excellent tool for removal of shimano b.b.s my bike is old and I was expecting a struggle to get the old b.b out. With the tool the job was made easy. High quality great price bit of kit. Saved me a lot of money if I had to take my bike to the shop. Highly recommended
Verified purchase: Yes | Condition: New
Purchased this because I change crankset on road bike . Arrived very quick easy to use..
Verified purchase: Yes | Condition: New
lovely quality amd easy to use
Verified purchase: Yes | Condition: New