 |
This type of switch is a good runner with a layout. It takes some trial and error to get the tracks all set up correctly so that the switch works properly. Once that is done and you have good current running through your layout, the switch will work very effectively. It is very nice to have control of the direction of your train whether it goes on one set of tracks or another. Good railroading.
Verified purchase: Yes | Condition: Pre-owned
These Turnouts are of Newer Design and are Plastic, Not the Metal Type. The switches are very durable and function much more smoothly. When power is sent to the switch/turnout there is a positive snap, not a sluggish operation like the metal turnouts that sometime stick half way. I read were you could uncover the coil inside and cut and rewire to connect direct power to the turnout. I did try on one, but I did not get it to function properly. I will say that these newer design turnouts do not require full power or full throttle currant to operate these switches like the older metal ones.
Verified purchase: Yes | Condition: Pre-owned
The Lionel O-27 Gauge 27” Path Remote-Control Switches, (Left and Right) are a perfect addition to my layout. The switches include Lionel's instructions to modify the switches to a fixed voltage power source. I performed the modification. The switches work perfectly. Thank you.
Verified purchase: Yes | Condition: New
Finaly I did not blow this one up. My fault, I smoked two previous left hand switches, I wired them wrong. I wired this one correctly, works good, last a long time
Verified purchase: Yes | Condition: New
got what i wanted for my trainset and in good working order
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Track
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Track
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
