Good on the whole, a couple of niggles.
This repeater works, and is capable of pretty good throughput.
As a bit of a tech-head, I want to be able to fine tune its operation.
What I wanted to do was to connect the repeater to the main router using 5GHz WiFi and have it rebroadcast on both 5GHz and 2.4GHz. This it will do without any problems, but there is no way to configure which channel and channel bandwidth it will use on 2,4GHz.
So I have a repeater connected over a fast link to my router, and it is using the same channel as the main router on 2.4GHz so they interfere with each other. Not so clever.
I then came up with a bit of a hack - I set up my phone's WiFi access point on the channel I wanted the repeater to use and had the repeater connect to it on 2.4GHz and at the same time connect to the main router on 5GHz. The repeater was then using the channel I had selected for my phone's access point function. I then turned off the phone's access point which left the repeater using the channel I had selected and relaying the main router's connection from 5HGz to 2.4GHz in the way I wanted. Job done... but it would have been a lot easier if there was a configuration option for this!
Verified purchase: YesCondition: Pre-owned