Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in SIM Cards
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on SIM Cards
Instructions on the box are very clear. My micro-sim fitted exactly in the metal frame. Insert the metal frame into the cutter and cut. Takes about the same pressure as a stapler. The result was a very clean cut micro-sim with no fringes or anything that had to be cleaned. No sandpaper necessary. Fitted beautifully in the nano-sim slot of my phone. It took just a few minutes!
Verified purchase: Yes | Condition: New
This is a nice little tool. It will cut a standard sim down to Nano size, or a micro sim down to Nano size. You will end up cutting some of the metal when you punch it out, but it will still work. If you need your sim to be micro size, you will still have to cut it to Nano size and then put it in one of the included adapters. You may also need to sand it a little with the included piece of sandpaper. Be sure to have the sim # recorded somewhere before you go sanding it away. Only sand on the plastic side of the sim, not the metal. This tool saved me money and hassle since I did not need to deal with mobile carrier.
Verified purchase: Yes | Condition: New
I went with the more expensive one and am glad I did. This is well built and solid, so it cuts very cleanly. Should last a long time.
Verified purchase: Yes | Condition: New
My old phone had a micro sim in it and needed to convert it to a Nano sim size. This did it quickly and easily. The cut was clean and had no problems putting the newly trimmed card into my other phone!
Verified purchase: Yes | Condition: New
i cut macro to nano, cut was clean but oversize. i had to use the enclosed sand paper to get it to fit. the phone read the sim card.
Verified purchase: Yes | Condition: New