Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Mixed Hand Tool Sets
I did extensive reviews on a number of manufacturers nut splitters before settling on TengTools. I was careful in setting up but corroded nuts didn’t bed well in the holder and after performing OK initially the blade soon started to twist. The grub screws despite me ensuring they were correctly tightened and properly positioned within the key way gave out and the blade tip became uncontrollable. Both the small size splitter and the larger size failed after about splitting 4 nuts each. Perhaps they should package them with spare grub screws and make the screws of a larger size and hence more robust to resist the turning action of the blade when tightening. Low cost nut splitters are in my view and experience not good value for money.
Verified purchase: Yes | Condition: New
Dismantled it first and greased the shaft and the groove as advised by an engineer for a similar tool. Worked a treat on the first nut, but didn't split the second nut, maybe the chisel point needed sharpening again. Anyway, it made a deep groove in the nut so was able to free it using a cold chisel and hammer!
Verified purchase: Yes | Condition: New
Top quality bit of kit ideal when you can't get a disc in to cut a nut
Verified purchase: Yes | Condition: New
I had two seized bolts on my classic car These bolt splitters removed them very quickly
Verified purchase: Yes | Condition: New
1st use and it broke, tip of cutter deformed and shaft snapped. I used it on an 18mm od ball joint nut.
Verified purchase: Yes | Condition: New