The 650 has needed this forever. I have a nearly every 650 upgrade from snowshooze and this is one of my favorites. Excellent quality, well thought out and easy to install and use. Perfect for initial setup when swapping calibers, or tuning when changing loads. Also a perfect complement to his excellent single stage kit. Plus he is great to deal with and really knows these machines.
Verified purchase: Yes | Condition: New
Great idea however it needs some additional engineering. The plastic ramp is too tight on the "T" slots and needed to be filed in order to slide freely. Unfortunately, when mounted to the Dillon 650 press frame, the plastic ramp interferes with the powder measure safety bracket and does not allow the full motion of the ram. I will reserve further judgement once I see how the manufacturer will resolve this.
Verified purchase: Yes | Condition: New
This is a very good idea. At first I did not know convenient this would be on my XL650 press. But now that I have it I would not want to be without it! It works great! It is excellent for setting up your dies after changing calibers. If your machine still has primers in it, you can move this actuator cam to the "OFF" position and the primers do not advance in the primer disk. This way you do not have primers going into the live primer collector. The product is very well designed and made. It was easy to install. I would highly recommend this product for anyone that has a Dillon XL650.
Verified purchase: Yes | Condition: New
Works perfect. I am frequently experimenting with different bullet and powder combinations with my 650. When I need to make adjustments, I may end up pulling the handle 5 to 10 times without loading a primer. It is very annoying to have unused primers moving through the unit like that and good primers fall off of that tiny ramp (as many have complained about). You can do the same thing as this product by physically removing the factory primer ramp that is held on with one allen bolt. I did that for a while but was worried I would eventually ruin the threads, plus it's not very convenient to add/remove that bolt frequently. This stop switch solves all of these problems and makes primer enable/disable super easy. Every 650 should have this product installed.
Verified purchase: Yes | Condition: New
I love this disconnect for the Dillon XL650 it works excellent I would highly recommend it. Very easy to install and adjust, just sorry I waited so long to get one. If your tired of having to pick the primers out or letting them run down the live primer tray then you will love this item. He was very prompt in getting this item out to me. If I could give it 10 stars I would. Gary W
Verified purchase: Yes | Condition: New