I have used the booster plug with great success on my R1200GS, F800GS and now on my R1200RT. To ensure euro compliance motorcycles tend to be set fuel lean which can lead to a harshness/excess heat in engine operation from my experience. The BoosterPlug is a Plug and Play device that keeps the enrichment correct and stable under different temperature conditions, and ensures a smoother engine, efficiency with no increase in fuel use and gives instant response on throttle opening. It literally plugs one lead directly onto the airbox sensor, the second lead plugs into the lead you've just removed giving a feed back to the ECU. The temperature sensor is then located in the air flow (I fastened mine underneath the airbox intake tube end) which measures ambient temperature and ensuring air temp is considered in the fueling requirements. It took 10mins to plug/fit and 30mins for fairing removal/fitment. Smoother in operation instantly on starting.Read full review
Verified purchase: Yes | Condition: Pre-owned
Seems ok, but not fully tested yet. Bike has developed a brake failure fault since fitting but I think that is just coincidence as I’ve spotted a small nick in the rear and sensor wire that might be the cause of that fault. Booster Plug seems to have reduced low speed low revs judders but will hopefully justify its purchase when I’ve tested it when the bike is hot, which is when low speed juddering/drive shaft lash is worst. I can say the plug, leads and connectors are all very robust and connectors are OEM quality.
Verified purchase: Yes | Condition: New
With conecting it to the whatever electronic management system the throttle initial bite returned and un unpredictability disappeared, now is there on request.
Verified purchase: Yes | Condition: New
Does as stated . Makes a big change. Time ant testing will tell.
Verified purchase: Yes | Condition: New