CURRENTLY SOLD OUT
 | Shop by category |
{"delay":300}
|
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Switch Power Supplies
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
The led lights are recessed, good for protection, but not as bright or visible as when the leds are exposed. The unit is an improvement over my previous similar looking unit in that with both ends connected, one can tell as all is good, (or not), from the main switch unit end and not have to go look at the other end. If there is a cable problem, the problem will display at either end whereas my previous unit, I always had to look end where the small unit was located. If there is a problem, the on off switch does not slide smoothly and is where failure where most likely occur - from one pushing too hard on it as it tends to act as if it is jammed.
Verified purchase: Yes | Condition: New
This product is straightforward and easy to use. It scans each line and indicates there is an issue. Based upon the display, I found it easy to determine what may be wrong. Some may want something fancy, with more bells and whistles, but I prefer something streamlined and functional. This definitely suits my needs.
Verified purchase: Yes | Condition: New
A great tool for anyone working or playing with networks, especially if your making your own cables or repairing. Easy to use. Fast checking. For what it cost I couldn't build it this inexpensively.
Verified purchase: Yes | Condition: New
You can just feel when you pick it up that its just a piece of platsic with a PCB inside and a couple of ports. But for 5 bucks, and the thing actually doing what its suppose to do, you can't really say much! Definitely worth the buy for the price.
Verified purchase: Yes | Condition: New
Saved me valuable time from the way I used to check the finished product (ohm meter with 2 needles to check continuity and position) That way was for a just finished cable on the bench. If I suspected an installed cable I would have to remove it to gain access to both ends. With this new tester I just have to plug in the remote to the furthest end of the cable and the master to the beginning end, watch the lights to see if and what the problem is and repair as necessary. i
Verified purchase: Yes | Condition: New
