I must have missed something in the advert as the paperwork that arrived with it stated 'requres fitting by an expert with a fuel pressure measuring device'. I managed with a bit of gueswork. The device I replaced had a dial showing the pressure being set so the Malpassi lock nuts were a supprise. It does seem a good well made product though and is working well. The car I fitted it to is a pre first world war special so I expect some challenges when adding modern kit.
Verified purchase: Yes | Condition: New
Bough this mainly to make sure that my 2 34ict carbs weren't getting more Psi than needed from my pump but also to add another layer of filtration which can never hurt. Not many options to fit one on a type 3 but bent the supplied bracket 90 degrees and mounted to the right hand read firewall. note these shouldn't be mounted on/too the engine as they need to be away from vibrations etc
Verified purchase: Yes | Condition: New
I fitted this to my Quantum kit car and it has made a huge difference. Starts on the button, runs better, really pleased with it. Well worth the spend.
Verified purchase: Yes | Condition: New
If like me you have fitted an aftermarket or uprated fuel pump you may find you are putting too much pressure on your carb(s). This allows accurate pressure adjustment with the bonus of good filtration.
Verified purchase: Yes | Condition: New
It works, and is much neater than an in line filter. This is the smaller model that has 1/4 and 5/16 spigots. I read a bad review from some one saying it did not work, but it turned out he had reversed the connections. The OUT has OUT written on it
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Fuel Pumps & Sending Units
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Fuel Pumps & Sending Units