Picture 1 of 2

Have one to sell?

(993)

Adaptec ASR 71605 1GB 16Port HBA RAID PCIe Controller Card + 4* SATA Cables

Name: Adaptec ASR 71605 1GB 16Port HBA RAID PCIe Controller Card + 4* SATA Cables
Brand: Adaptec
Price: 96.6 AUD
Availability: InStock
Rating: 4.75 (8 reviews)

GBP 46.99

ApproximatelyAU $96.60

Condition:

Opened – never used

Quantity:

More than 10 available

Breathe easy. Returns accepted.

Postage:

Doesn't post to United States.

Located in: SHENZHEN, China

Delivery:

Varies

Returns:

14-day returns. Buyer pays for return postage. If you use an eBay postage label, it will be deducted from your refund amount.

Payments:

Shop with confidence

eBay Money Back Guarantee

Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab

Report this item - opens in new window or tab

Seller assumes all responsibility for this listing.

eBay item number:375024401907

Last updated on 12 Feb, 2025 00:31:43 AEDSTView all revisionsView all revisions

Item specifics

Condition: Opened – never used: An item in excellent, new condition with no wear. The item may be missing the ... Opened – never used: An item in excellent, new condition with no wear. The item may be missing the original packaging or protective wrapping, or may be in the original packaging but not sealed. The item includes original accessories. The item may be a factory second (i.e. it has a small flaw that does not affect the operation of the item such as a scratch or dent). See the seller's listing for full details and description. See all condition definitionsopens in a new window or tab

Brand: Adaptec

Type: RAID Controller Card

EAN: Does not apply

Model: ASR-6805T

MPN: ASR-71605

Item description from the seller

About this seller

Joined Mar 2022

Usually responds within 24 hours

Visit Store Contact

Detailed seller ratings

Average for the last 12 months

Accurate description

4.9

Reasonable postage costs

5.0

Postage speed

5.0

Communication

5.0

Computers/Tablets & Networking

Seller feedback (1,046)

0***r (1465)- Feedback left by buyer.
Past 6 months
Verified purchase
Item was in new condition as described and appearance. Good value. Well packed. Works well. Quick easy postage. A Good eBayer.
5PCs LOW PROFILE BRACKET for Intel I340-T2 I350-T2 HP NC361T DELL 7MJH5 49Y4230 (#374835483010)
c***m (1569)- Feedback left by buyer.
Past 6 months
Verified purchase
Absolutely fantastic packaging. Received 100% in the best condition. Quality beyond my expectations. Great value. Buy yours now. Great to replace broken carrier. I received a green one it’s really a great appearance. Shame it’s covered by the cpu! Thank you for your great customer service and care in shipping this product. I can’t fault this transaction and will definitely order again if needed. I absolutely love this purchase. Buy yours too, with no hesitation.
AMD EPYC Threadripper CPU Tray Socket SP3 TR4 TRX4 Fixed Support Carrier Frame (#375503102714)
.***c (27)- Feedback left by buyer.
Past 6 months
Verified purchase
Quick communication to answer my questions. Great price. Excellent packaging. Was very happy with the product and was exactly as shown and described.
10 Pcs Full Height Bracket for M1015 M5015 LSI 9210 9211 9266 9271-8i P420 P410 (#375564240506)

See all feedback

Product ratings and reviews

Learn more

4.8

8 product ratings

6 users rated this 5 out of 5 stars
2 users rated this 4 out of 5 stars
0 users rated this 3 out of 5 stars
0 users rated this 2 out of 5 stars
0 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

See all 8 reviews

by aaronmdjones
05 Dec, 2020
A fantastic, fast HBA, but read the whole review for some requirements & gotchas
At first I was only getting ~800kB/s through this card. After some troubleshooting, reseating the SAS connectors, changing kernel versions, etc. the situation did not consistently improve. At this point I removed the card from the PCIe slot and noticed that, compared to a USB 3.0 PCIe card I happened to have right next to me out of sheer luck, the PCI bracket was mounted on the wrong side of the PCB. This was preventing the card from going all the way into the PCIe slot. After correcting that I am getting full speed to all drives on all ports simultaneously. It must have been a bad PCIe electrical connection. On to the details! You MUST ensure adequate airflow! The PCB has "THIS CARD NEEDS 200LFM AIRFLOW" printed on the silkscreen, and I don't doubt it. As I'm using this in an ATX ... At first I was only getting ~800kB/s through this card. After some troubleshooting, reseating the SAS connectors, changing kernel versions, etc. the situation did not consistently improve. At this point I removed the card from the PCIe slot and noticed that, compared to a USB 3.0 PCIe card I happened to have right next to me out of sheer luck, the PCI bracket was mounted on the wrong side of the PCB. This was preventing the card from going all the way into the PCIe slot. After correcting that I am getting full speed to all drives on all ports simultaneously. It must have been a bad PCIe electrical connection. On to the details! You MUST ensure adequate airflow! The PCB has "THIS CARD NEEDS 200LFM AIRFLOW" printed on the silkscreen, and I don't doubt it. As I'm using this in an ATX tower, and my side panel does not have a fan mounting position, I mounted a 120mm fan onto the inside of it instead, and built a cardboard shroud around it with some duct tape. It's a bit ghetto, but it works, keeping the card under 55 Celsius. Ensure you set a fan failure alarm on your motherboard header! See the pictures attached to this review for more details. One thing I wish this card had is an array of headers for hard-drive activity LEDs. Now that I'm not using any of the SATA ports on my motherboard, the HDD LED header on the motherboard will never activate, and so I've moved the chassis HDD LED connector to the card's ALARM header. I would have preferred if there were individual headers for each drive (or at least each SFF-8643 connector), and a master header for all drives, so that I could connect the chassis HDD LED to the latter. This is a very minor quibble though. Note that the ALARM header outputs a constant 3.3V on one pin, and has a 2kHz open collector on the other pin (as per Adaptec's installation manual), so this is suitable for driving most chassis LEDs, as the ATX motherboard specification calls for 3.3V LEDs too, and most LEDs will not mind being turned on and off 2,000 times per second. Activating the alarm test functionality with ARCCONF does illuminate my LED. I recommend staying out of the UEFI HII administrative interface on this card. Even after I put the card in HBA mode and powered off, and then connected my hard-drives, upon entering the interface again to confirm it detected all of them (which it did), I booted my operating system to discover that the drives had had their partition tables wiped. This was not an immediate concern, because I use GPT, which places a backup copy of the table at the end of the drive, and I don't create partitions that occupy the whole drive -- I leave 128 MiB of unallocated (non-partitioned) space at the beginning and end of drives, for precisely this sort of reason. I've had all sorts of drive corruption issues with controllers and operating system installers (I'm looking at you, Windows) over the years that have taught me this lesson the hard way. Always partition (even if it's only going to be 1 partition), and always leave a large gap around them. Anyway, while the Linux kernel will only read the primary GPT at the start of the drive (which was now missing), gdisk(8) (from GPTFDISK) can restore this backup partition table (at the end of the drive) for you automatically, so I was back in business straight away. Stick to the ARCCONF command-line utility for querying and configuring it; this has not happened again (even after connecting more drives) since I did that. Also note that if you want to use ARCCONF under Linux, you will *need* to disable "CONFIG_HARDENED_USERCOPY_PAGESPAN" in your kernel. You can have the regular hardened usercopy option enabled, but the _PAGESPAN sub-option makes ARCCONF segfault. Overall this is a fantastic card (especially for this price; £42!), with a few warts but no show-stopping gotchas. It will easily talk to 16 hard-drives simultaneously, without any observable bottlenecks. Note that I have not tested the BIOS boot functionality (as I have a UEFI machine with the CSM disabled). Nor have I tested any SAS expanders, though it does claim compatibility for up to 255 hard-drives if you choose to do so. Finally, I have not tested hardware RAID mode, as I use Linux mdraid and so put the card into HBA mode.
Verified purchase: YesCondition: Pre-ownedSold by: hbr2015
by wiluk_vryqe
14 Apr, 2024
Good card just remember to keep cool
Great wee card, but blooming heck it gets hot, needs really good ventilation and airflow… Apart from that it’s very good… Get a small fan (I use noctua) and screw in to heatsink fins and is great…
Verified purchase: YesCondition: Pre-ownedSold by: network-servers
by kerppa77
01 Jun, 2021
A great card for the multiple drives raid setups
Just what I waited. Ability to mount several sata drives via miniSAS HD ports.
Verified purchase: YesCondition: Pre-ownedSold by: itinstock
by tim.shippam
11 Apr, 2024
Look's brand new does the job I brought it for! Thank you!
Look's brand new does the job I brought it for! Thank you!
Verified purchase: YesCondition: NewSold by: pcbuyit
by kx3210
08 Dec, 2021
Good product
Worked without problem
Verified purchase: YesCondition: Pre-ownedSold by: network-servers

Picture 1 of 2

Adaptec ASR 71605 1GB 16Port HBA RAID PCIe Controller Card + 4* SATA Cables

Shop with confidence

Item specifics

Item description from the seller

ebl-lcd

100% positive Feedback•9.9K items sold

Detailed seller ratings

Popular categories from this Store

Seller feedback (1,046)

Product ratings and reviews

Most relevant reviews

A fantastic, fast HBA, but read the whole review for some requirements & gotchas

Good card just remember to keep cool

A great card for the multiple drives raid setups

Look's brand new does the job I brought it for! Thank you!

Good product

More to explore:

ebl-lcd

100% positive Feedback•9.9K items sold

Detailed seller ratings

Popular categories from this Store

Seller feedback (1,046)

Picture 1 of 2

Adaptec ASR 71605 1GB 16Port HBA RAID PCIe Controller Card + 4* SATA Cables

Shop with confidence

Item specifics

Item description from the seller

ebl-lcd

100% positive Feedback•9.9K items sold

Detailed seller ratings

Popular categories from this Store

Seller feedback (1,046)

Product ratings and reviews

Most relevant reviews

A fantastic, fast HBA, but read the whole review for some requirements & gotchas

Good card just remember to keep cool

A great card for the multiple drives raid setups

Look's brand new does the job I brought it for! Thank you!

Good product

More to explore:

Related searches