CURRENTLY SOLD OUT
Shop by category |
{"delay":300}
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
I have installed several extensions on many pistols, but never has an extension been such a benefit as with the "littlest" Keltec (PT32). It seems to give you more room on the frame than its size indicates because of the compact nature of the pistol. It's easy to install and enhances a very useful "tool" without "messing up" the "compactness" of the "package". "Bone simple", it is made to last; this product is a "must have" item for the "tiny" Keltec.
Verified purchase: Yes | Condition: New
Excess plastic around the top needed to be sanded off before the magazine would go deep enough into the mag well to engage the magazine catch. The slots cut into them need to be extended - and it ain't easy to do! - in order for it to slide all the way back onto the magazine body. As is, it won't go far enough to engage the button on the floorplate and, thus, sticks out too far in front and pushes off with finger pressure. Once modified, they seem to work OK but I won't really know until I put a few hundred rounds through each. If you don't mind putting in the time & aggravation to modify them for the Zastava M70, they appear to be a decent deal. If you want hassle-free, though, look elsewhere. Your mileage may vary on guns other than the M70.
Verified purchase: Yes | Condition: New
I was very skeptical that this extension could be of benefit given the very small geography of the native grip. It was actually the product review from another consumer that convinced me to go for it. I will say that I struggled to get the small retention plate to hold the sprig in place while securing the grip onto the magazine. It could've been user incompetency. I was disappointed when I could not get the magazine to lock in place after securing the grip. Then I just gave the magazine a hail Mary squeeze between both palms and "click" it was in. I released the magazine and did this a few times and the magazine and griped have paired naturally without any issues. I'm still surprised at the extra grip geography I gained which is substantive compared to not having the extension. NO REGRETS, only satisfaction. Read full review
Verified purchase: Yes | Condition: New
These grip extensions improve the shootability of my Tomcat, and, with a very slight adaptation, they also made a great improvement on my Bulgarian Makarov. The small, steel protrusion on the base of the Makarov magazines was always right under my pinky finger, and recoil made it dig in. Experimenting, I found that the Tomcat grip extensions would exactly fit on the base plate of the Makarov magazines. However, the extensions were about 1/2 mm too wide to fit the magazine well. So, I laid a piece of 150-grit sandpaper on my work table, put the mag extension onto a Makarov magazine, and carefully stroked the extension left and right, back and forth, a few times. Then, flipped it and did the same on the other side. Careful not to grind off too much, I cleaned off the grit and tried inserting the magazine into the mag well. VOILA! I modified six magazines in this way, and then tested them at the range. Zero problems. With the substitution of rubber grips and addition of these extensions, the Makarov is actually pleasant to shoot!Read full review
Verified purchase: Yes | Condition: New
Baretta 3032 Tomcat pistol too small for your Hand, hand grip about 1/2" too short pinkie finger below grip magazine extension solved problem and made it more enjoyable to shoot. Can now have a better grip on the gun when I pull the trigger. not much recoil but with only 2 fingers on the grip not very comfortable. Should have come from Baretta Factory with these they look like they are factory.
Verified purchase: Yes | Condition: New
Easy to find what I needed and order it. The magazine extensions got to me pretty fast and in good order. It was easy to take off the stock magazine butt plates and replace with the new ones. They are perfect and I love the feel. My pinky doesn't hang over the bottom edge anymore. They feel great and are well worth the money and even made my shooting more accurate. Thank you
Verified purchase: Yes | Condition: New
Works great but could have been designed better. The front of the grip extension comes to a point. While it gives a better griping surface, the point can make the grip print when wearing a light shirt. That wouldn't happen if the total grip extension. were all the same length.
Verified purchase: Yes | Condition: New
Work Outstanding..have them on all of my Smaller/E.D.C Weapons..Makes a Smaller Weapon Grip.. Much easier to get a solid Grip purchase on..This little bit of finger extensions make for Improved Accuracy when Shooting & look awesome when installed on Magazines.. Respectfully Cpl.P.M.Tellez U.S.M.C. (Vet) 1/9 - 2/1 S.T.A Semper-Fi 🇺🇸 God Bless 😇
Verified purchase: Yes | Condition: New
I have a Beretta Tomcat that I carry most of the time. It is a small pistol and the grip is a little short. I purchased the Pearce grip extension at a very reasonable price for a package of two. I quickly installed the item on my magazine and tried it out. It made all the difference as now I can grip the gun more securely. It gives me the extra little grip I needed. I wish I had bought one sooner. I gave the other extender to my brother who has a Kel-Tec pistol which fits perfect..
Verified purchase: Yes | Condition: New
No instruction provided as to how to install, but the existing end cap on the stock magazine has to be replaced with the one sent with the product. Not hard to do, but not exactly intuitive as to procedure. Once installed, they work well and make the grip much better on a small pistol.
Verified purchase: Yes | Condition: New
