Looks terrific, mine needed a little customization.
Center caps are of the same quality as my original set, only in red instead of black. I found that the 50mm inside tab diameter was probably 2mm short of my 52mm wheel cap hole. Easy fix: I just carefully heated up the plastic tabs and expanded the tabs outward. It didn't take much time or effort and now they fit firmly; no movement whatsoever. Make sure you use a very, very low flame on a gas range and go slowly and heat the tabs one by one so you don't melt the tabs. I used a pair of metal cooking tongs to hold the cap and leather work gloves to bend out the tabs while they were too warm to the touch to work without gloves.