 |
This is a great way for kids to learn about using tools, but I have to deduct a few points for these reasons: The cogs/gears are manufactured too thin so they wander around on the plugs (those grey things you see on the board--they can be hammered in) and when doing so lose contact with each other and either stop turning or bind. Please note that the two pairs of legs have the hole for mounting the bottom tray drilled slightly off-center. Don't put them on backward and then have to take it back apart as I did. No washers included with the hardware meaning the little button head screws like the ones you get with Ikea furniture can just back out over time. Try using a little nail polish as thread sealer when assembling. Do yourself a favor and fit a 4mm allen head bit in a ratcheting screwdriver/screwgun. Don't waste time with the tool that came with it. The natural colored wood is unfinished. It is almost entirely plywood. Put a little wax on the threads for the vise screw. Other than that, enjoy!Read full review
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Tool Sets
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
