 |
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Other
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Other
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
good quality kit, No issues fitting anything to my 2004 4.8L patrol.All Japense bearings as described. All seals seem fine also. The only improvement would be to include swivel hub bearing grease cover plates x 4 as they are prone to minor damage when you tap these bearings out (I managed to straighten mine out ok though just need a thin punch to minimise damage). I had to make up a tool to knock the stub axle bearing out from a 12mm piece of solid rod (youtube video should help on that). The smaller outter wheel bearing was a tad tighter going onto the stub axle than the bearings I took out and I had to give both sides a light tap into place before I could get the bearing nut to go onto the spline (will be interesting to see on 1st regrease how easily it slides back off). Also needed to make sure I really pre-loaded the bearing with the torque wrench to over 160Nm as at first I had trouble getting the circlip onto the axle I'm guessing because that bearing was still needing some help on it's way home (make sure you have the Patrol bearing tool). Overall recommend this purchase. Massive cost saving from genuine. Don't forget to go for a short drive and then check bearing adjustment again. Mine needed a nip up so I didnt apply any silicon onto the locking hub assembly until after the readjustment. Read full review
Verified purchase: Yes | Condition: New
Good quality and good value,makes a big difference
Verified purchase: Yes | Condition: New
Fitted the complete kit as ordered. Parts fitted exactly. No more wobbles. Very happy with the quality of the parts.
Verified purchase: Yes | Condition: New
Mint great quality . Very fast postage
Verified purchase: Yes | Condition: New
