 |
Wow talk about terrain flexibility, in the past several decades I have had to go from riding a 53-39 crank with an 11-23 cassette to a 50-34 and 11-36, yes I have gotten old. Thanks to the Wolf tooth I can still tackle the terrain that I used to do but now it is a little easier. One note is that to get the full use of your gear train you must have a mid length rear derailleur. A short just won't cut it. I had to get rid of my beloved Dura Ace shorty and get a long cage Ultra. The system works great and well worth the money.
Verified purchase: Yes | Condition: New
It is not compatible with my DuraAce 7900, with a 34T Shimano flywheel for the rearderailuer. The ratio of two systems, DuraAce and Tiagra are different. You will end up losing one of the gear. My bike mechanic recommended not to install it. It may bounce back due to high tension to hit the frame. Do consult a proper bike mechanic.
Verified purchase: Yes | Condition: New
I have used this product three times now. It is good but not perfect. My primary purpose has always been to install a cassette with a larger sprocket. If one has a small cage Shimano derailleur, the largest cassette recommended by Shimano is an 11-28. This will allow one to add a larger cassette. I have used an 11-32. The biggest problem though is that the chain has to be lengthened and if cross chaining from small chainring to small cog, the chain has slack that can be an issue. The outcome has to be either using a shorter chain,( which results in the large to large binding), or using the longer chain and avoiding small to small. An experienced-rider avoids those combinations anyhow so I am using it with no issues.
Verified purchase: Yes | Condition: New
Great Rear Derailleur adapter to install on any Road Bike wanting very low gearing, I have two of these mounted on my road bikes and let me tell you these "WORK"! There are a lot of YouTube videos on this RoadLink Adapter, I am running on my road bike two cassettes 11-36t and 11-40t with short cage 105 RD, Just make sure you follow the instructions on Wolftooth website, My brother's bike has a triple up front and Wolf tooth says it won't support triple chain rings but it works prefect on my brothers bike and No Additional modification done to the drivetrain!
Verified purchase: Yes | Condition: New
I had a 2x10 Tiagra drive train on my Cannondale CAADX (46/34 and 12x32). It worked fine but with all the hills around my house I wanted a 1x setup. I went to a 40 tooth chainring and an 11x40 cassette thanks to Roadlink. Put the 40t on the outer slot, installed the 11x40(10 spd), and the Roadlink. Shifting performance is unchanged and I now have a contiguous set of 10 gears. Very happy with Roadlink. BTW, my total cost for conversion was about $90.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Rear Derailleurs
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
