I got this for my Rohloff Speedhub-equiped TI bike. I had been using a single ring crank, but the chainline was much too narrow for the cog on the 135mm hub, resulting in extra noise and rapid wear on the chain and cog. Setting it up on the outer ring got the chainline perfectly straight. (I took off the other rings.) The black with white trim goes great with my frame and components.
The hole where the pedal screws in after 3 days of riding stripped out and almost caused me to rack so therefore the quality can't be that great that won't even last a week there should be some way to reinforce the way the pedal stay in these cranks