Important information for do it yourself installation.
Warning, this part is easy to install if you know what you are doing, if not just follow this simple hack. (sorry, no pics to help)
When removing the old switch do not worry as there is a fetzer valve (Schrader valve) behind the switch body so very little gas will escape when removing the switch. Be careful not to lose or break the o ring on the fitting. to install the new switch the pressure will try to blow the o ring off the male part of the fitting and you will cut the o ring.
To remedy this take some electrical tape, unwind 8 inches and fold it about in half and wrap it around the fitting covering no more than half the o ring, wrap it a few times on the side of the o ring that allows you to unwrap the tape as you install the fitting. screw the fitting on slowly until teh gas stops leaking, unwrap one wrap or until gas escapes, and screw the fitting on a little more, do this until the tape comes all the way of and the fitting is on and the o ring is not showing. Tighten and install the switch plug and you are done!
Verified purchase: YesCondition: New