Deepcool Tesseract - Good case mostly for the price with one possibly major drawback - Lack of CPU power cutout for cable management
The Deepcool Tesseract case is a great budget case with plenty of room to work in for air cooling - it does only include one fan with the case out of the box (the case only accepts 120mm fans) - 2 in the front , 2 in the top and one in the rear of the case - there is also space for an additional mount for one inside on the drive cage to give airflow for the graphics card(s) should you need that. Cable management is adequate at the back of the case thanks to the stamped out rear side panel. The biggest drawback to the Tesseract is the lack of a dedicated cutout on the motherboard tray for the CPU supplemental power cable. For this reason you will either have to plan ahead with your build in choosing this case and purchase a power supply with all flat cables (including the CPU supplemental power) - as it has to be run underneath the motherboard to fit correctly for clean cable management - Note you “might” possibly be able to get away with an sleeved extension cable here but your mileage may vary - if Deepcool would have included the cutout for the CPU power cable in their design of this case it would have been a total winner in my opinion.
As far as storage options go the drive cage is one piece located in the front of the case and houses 4 x 3.5 inch (bottom) hard drives and 3 x 2.5 inch hard drives or SSDs.
And as far as air cooling goes - cooler master hyper T4 - fits fine (which is what I used) - anything of a similar height should be okay but just check
Verified purchase: YesCondition: New