The kit has all you need to replace the old pump The only thing is the electrical cable is not as long as the original, this can cause a problem, if you do not have a heat gun to shrink the heat shrink sleeve supplied. ( I used a hair dryer takes a bit of patience but is do able.) with the long electrical cable its only a matter connect up near the printed circuit board above the water level.
Verified purchase: Yes | Condition: New
The lead out of the motor is short, a lot shorter than the original as supplied with the toilet. You have to use some of the old cable to make it long enough and put joins in the cable that are in the flush water. They do supply some heat shrink to waterproof the joint, but over time it may leak. As I had already cut the old cable to remove the pump I had to make 2 joints. If the cable was just 20mm longer this would not be an issue.
Verified purchase: Yes | Condition: New
Product sold as per manufacturer's specifications. Included all necessary components. I had actually ordered the wrong component and OuRVan were excellent in their communication and helping me solve the issue.
Verified purchase: Yes | Condition: New
No problems, replacement pump works fine. Only time ill tell as to how long it will last.
Verified purchase: Yes | Condition: New
Pump is same as original.which is great. However needs proffessional to attach wiring which must be aa waterproof connection. Pricng is expensive Source of suppy was best price ,post paid . Very good trader Recommend
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Other Caravan & Motorhome Parts & Accessories
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Other Caravan & Motorhome Parts & Accessories