About
All feedback (64)
- boxxetech (1100)- Feedback left by buyer.Past monthVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- 9922671@deleted- Feedback left by buyer.More than a year agoVerified purchaseGreat ebay customer! Paid very quickly. Smooth transaction!
Reviews (4)
03 February 2018
Works Well with my Netgear N router
1 of 2 found this helpful I had no problem setting up the extender. I have yet to try the fast lane feature, but will soon.
It if fairly unobtrusive in the wall socket.
26 April 2018
Nice cover - custom punched for this model CR-V but similar to other generic covers.
This is NOS OEM product (1999 made), it came with needle, waxed thread (more than enough), and nice leather cover. It DID NOT come with instructions, but those easy to find on the internet, as this product is virtually, if not really, identical to a name brand steering wheel cover OEM - at whose site you can download the instructions or watch a you tube video. Took a bit over an hour to do. Don't need to, but wearing gloves might be a good idea.
Stretch the string first before starting. Start three holes over from seam (place over with seam at the bottom) and work left. Turning steering wheel about half way might help bring the work down closer to your hands so you can see better.
Leave 6 inches at the start and when finished, cut off string about 6 inches from the other end. Do a double knot and use needle to push into the seam to hide the knot.
This NOS Honda kit was different than the current manufacture of identical covers - it has holes specifically placed to match the steering wheel hubs - the others have a continuous series of holes requiring you to do faux stiches to cross the hub. PS: when doing this OEM cover that means running the thread behind the hub under the cover to bridge that gap.
Nice cover - it WILL pull tight, you won't break the thread or the cover. If you have bumps on the steering wheel, try to pre-stretch in those areas (again, watch videos from the current manufacture of these - it isn't honda)
11 March 2018
excellent replacement
1 of 1 found this helpful the only difference I noted in quality or fit of this replacement motor was that the connector was on the opposite end of the motor; though the dryer cable had sufficient slack to fit easily. Note: be sure to observe the 'tang' in the rubber gasket on the pully end, as it should fit into the slot in the motor mount - on my maytag this put the electrical connector at about 45 degrees off the top, but that caused no problems.