About
Reviews (3)
14 August 2018
Good product, good price
My outboard motor had a miss and was rinning rough. Replaced with these as exact replacements. Motor runs very smooth now
10 May 2017
Great Tires
The area I mow has steep slopes. I put these tires on a zero turn mower. They are awesome. Work perfectly. Just what I needed. No more slipping and sliding.
04 April 2017
Lee Mold 200 gr RNF
1 of 1 found this helpful I own at least a half dozen other Lee molds. They all work good. One thing that I didn't see in the instructions is that you need to coat the mold with carbon to get better release. You do this with a wooden match flame. It helps if you do this before each casting session. Just light a wooden match and hold/wave the flame over every part of the mold cavity until it is blackened. Also, it seems that that the first 50 or so bullets are junk. Just throw back in the pot and re melt. The mold needs to be really hot. It needs to be so hot that it takes more than 5 seconds for the sprue to harden. The weight of the bullet is gauged to a lead tin alloy. If you have a softer alloy, more lead, the bullet will be a little heavier than stated, or a little heavier, depending on your mix.