About
All feedback (538)
- cmon8876 (2479)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- szsjbd-21 (5269)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- corecherry (1493)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- miyajuan- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (20)
20 December 2018
Good Value for the Price...but...
Overall a sturdy 3 AA size cell battery holder hard-wired for series connection.
Holders are inexpensive and fair value but, the lead wires are crimped under the terminals. Cheap to make but, the leads are vulnerable to breaking so care must be used not to flex them too much.
If leads do break on this type of holder it's very difficult to repair them as it's hard to solder the leads back to the terminals without melting the plastic.
Good for locations that are protected from rough handling.
The mounting holes are directly under the center of the outer cells so mounting options are limited for the type of hardware used. A better design would keep those holes but, add outboard molded ears on the holders that could be used for mounting or trimmed by the user.
04 October 2018
Pretty Weak
This solar panel is built pretty well and works but, doesn't produce much power. Had problems wunning even fairly low-power electronic devices with it.
04 October 2018
Cheaply made but, cheap
These sockets have adjustable prongs/blades for different plug standards. That's good for making them general purpose but also makes them susepable to mechanical malfunction. And, they're so cheaply made that it's kind of a problem. But, they are so cheap, I still rate them as a "good deal". Biggest complaint is the blades are so thin they fit loosely in sockets that have a little wear and age and tend to fall out. Bending the blades a bit with pliers can help a little to make them fit a bit more snugly.