About
Reviews (12)
02 January 2018
Did the job.
Worked perfectly.
02 January 2018
Good fit. Good look. Dismiss rear loops.
When fitting the rear loops I dismissed them and connected the fabric flap and rear panel together with the supplied metal clips.
1: Open the ring end of the clip just slightly with long nose pliers, then pierce through the flap with the other end and slide the fabric into the ring end which you should have slightly opened in step one.
2: With the other hooked end pierce through the back fabric inside the overlocking thread to the edge of the fabric, close the hook with ring nosed pliers. I used 5 of the clips evenly along this flap. You could make this easier by lowering the headrest to give more available cloth, not forgetting to raise it again to make the seat cover taut.
3: Slightly open up another of the metal clips ring ends and thread onto a seat bottom loop to one side, close the ring with long nosed pliers.
4: Thread this loop hook through the front two loops and onto the loop on the opposite side, its a stretch but that's what's required to get the best look out of covers, making it as tight as possible.
5: Close the hook end of that clip and you're done.
Considering what I've observed in national and local shops I find these a total bargain. They won't be waterproof to the degree of spilling a cup of drink as there are two seems running the length of the covers, but they are the best of what I've looked at these last few weeks.
Would purchase again if damaged.
07 October 2017
Fiorino 2008+
Does not fit Fiorino 2008 onwards!