i_know_i_am on eBay

About

Location: United StatesMember since: 08 March 2001

Feedback ratings

Last 12 months

Positive10- positive feedback in last 12 months

Neutral0- neutral feedback in last 12 months

Negative0- negative feedback in last 12 months

All feedback (192)

a-premium-us (76358)- Feedback left by buyer.
Past month
Verified purchase
Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.
brakecrafters (23538)- Feedback left by buyer.
Past 6 months
Verified purchase
Hope to do business with you again. Thank you. AAAA+++
*****- Feedback left by buyer.
Past 6 months
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
valkyriecarbsandcustom (986)- Feedback left by buyer.
Past 6 months
Verified purchase
Thanks for purchasing our products at valkyriecarbsandcustom. Come again
sixity (191186)- Feedback left by buyer.
Past 6 months
Verified purchase
Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.
*****- Feedback left by buyer.
Past 6 months
Verified purchase
Hope to deal with you again. Thank you.

See all feedback

Reviews (3)

1984-2001 Jeep XJ Cherokee 4WD Zone Offroad Transfer Case Drop Kit [J5006]

17 March 2017

Simple install, Good product, Complete kit

This kit simply lowers the mounting point of the transfer case support a little over an inch straightening both output shafts relative to the diffs. A stud must be removed on both sides for installation of the new bolts (provided). Removal of the studs can be a problem. Double nutting did not work for me so I just welded the old nut to the end of the stud and used the impact to pull them out. Easy-Peasy! If you are still running a factory exhaust, this will affect the hanger that is attached to the transfer case support (the thing you are lowering). It can place the exhaust hanger in a bind and put pressure on the exhaust manifold. I cut the factory exhaust hanger and then when finished with the work, lined up the cut ends where they need to go now and welded them back together. Installation of this kit is not difficult. Takes about two hours if you have the tools and a good head. Bonus - they included thread lock in the kit so your 4 new bolts don't back out.

Aussie Locker XD-13530 Dana 35 - Jeep Dana 35 1994 newer - New Cross Shaft

26 January 2021

Good solution to stop one-wheel-drive

For some time I've run a geared limited slip for traction control but tired of having to pump the brakes to engage the idle wheel, I switched to the Aussie Locker. I installed this unit one day and went wheeling the next. Install is pretty simple. You need a set of feeler gauges and basic hand tools. Order new thrust washers when you order the Aussie. Yours might be okay but you won't know until after install. They are inexpensive so just buy them. In use, the Aussie did not disappoint. Both rear wheels remainder engaged helping me through all sorts of terrain. Expect audible clicking when turning under power and when locked in 4x4. I installed this in a 97, 4 cyl., 2-door Wrangler so, short wheelbase and light front end. On the highway, if you mash the gas while in a turn, the Aussie will engage and push the front wheels. It's something to be cautious about. In summary; happy, pleased, satisfied.

Redcat Hexfly 2S 7.4V LiPo 3200mah 20C Battery HX-320020C-D Deans Connector

22 April 2020

Good packaging. Great product.

Needed (wanted) a larger capacity battery for my rock crawler. This fit the bill. It was well packaged and has performed well.

See all reviews