Rovan Mini Pin Off-Road Tires 170x60mm (Fits LOSI 5ive-B, DBLX, 5ive-t)
AU $92.48
All items
About
All feedback (4,257)
- l***- (270)- Feedback left by buyer.Past monthVerified purchaseAs advertised, very nice. 👍
- y***0 (1231)- Feedback left by buyer.More than a year agoVerified purchaseGreat seller absolutely fast shipping
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- r***n (799)- Feedback left by buyer.More than a year agoVerified purchaseExcellent seller! Exactly as described and worked perfectly! Thank you
- v***d (1813)- Feedback left by buyer.Past yearVerified purchaseJust as described. Thank you.
- yowoohrb (8590)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (10)
02 January 2019
Amico cut-50
1 of 2 found this helpful They sent me the cut 50 even though I ordered a cut 40, not complaining there. Seems to work very well, time will tell on longevity, I have several amico products and they work but they're cheap with reason. Id be happy with a few years on this plasma considering the price, sad we have to think like that these days. The plasma has an internal water trap/regulator, I also mounted a second one on the back of machine, filled both with desiccant balls, and I run a large trap right off my compressor. Thickest cuts I’ve made so far are 1/4”, cut like butter, I’ve only ran the machine on 220v and don’t intend on using the 110v feature. Pilot arc is a very nice feature, leads have some decent length but don’t expect to get too far from an outlet, I noticed mine was missing a few small screws on the case but whatever, came packaged rather well, as long as a person can get some decent longevity out of it I’d recommend it, it does what it’s supposed to do and seems to do it well so far.
11 February 2020
Mako 372xp 52mm
1 of 1 found this helpful One of the nicer aftermarket kits I’ve seen, minor casting marks on intake and exhaust but transfers were clean on mine, mine also had nice chamfering. The squish on this one is rather large if you're going to run it right out of the box. Only other thing I noticed was the auxiliary transfer ports are unusually small, I widened them towards the intake considerably, not sure how it runs out of the box but I ported mine and run a stihl 064 piston and its a very strong saw, time will tell on longevity.
16 January 2019
It'll weld
3 of 3 found this helpful Yes it welds but don't expect it to do more than its capable of, this is a 110v unit so you'll never actually get the 140 amps it claims to be, highly doubt it'll burn 1/8 rods, or at least not effectively, although haven't tried because its not meant to, stick with 3/32 rod or smaller and you'll be fine, I bought solely for the purpose of welding gates in a hog barn where only 110v is available, don't expect perfect welds or strikes but it will weld decent, not great, decent. Given the cost, portability, and convenience its not bad. The leads, stinger and ground are cheap, the dial isn't accurate, circuit boards are not coated for moisture/dust protection, bottom line, yes corners were cut and components are generic but what do you expect given the cost