About
All feedback (955)
- reselltherapy11 (4104)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- iherb (220103)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- teeeceeegeee (791)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
Reviews (2)
10 April 2017
Not for my needs
I had been using some name brand labels but thought I would try these because they were a good price, unfortunately do not work well with how I use them. There are two significant problems I am having with these labels. 1) A sheet does not stand up well to repeated passes through the printer. I print individual labels so can feed a sheet 30 times. The brand name labels handled this perfectly. But these labels, I can only print individual labels on the top three rows, rotate sheet, then print another top 3 rows but after that, the sheets start to crinkle and jam in my printer. 2) The labels I received are not a full 8.5" in width, short by about 2mm. Doesn't sound like much but definitely a problem when the first character in each address line prints off the label. I first thought it a template problem and tried a few different ones but to no avail. Finally figured out the width shortage and can work around this by adjusting the width of printer's manual feed tray. I am making do with these labels but won't purchase again. If you print one full sheet at a time and can manually adjust the width of the manual feed, then these probably would be sufficient.
25 January 2018
Wouldn't buy again
2 of 6 found this helpful I purchased these to replace a set of 3 that had started to wear down. First off, the set I received came with red rubber? handles. As soon as I opened, the smell of gas/oil was very strong. When I used the tools, my hands would smell too. I cut the handles off and trashed them which removed the smell. But my biggest problem with these is that they work as well as my set of 3 which I had been using for quite awhile and showing wear. I use these primarily to file down some rough cut edges on metal tube beads. These do not have enough grit to do the job properly.