About
All feedback (90)
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- dhvgaw3 (296)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.Past yearVerified purchaseGood buyer, prompt payment, valued customer, highly recommended. AACS STORE
- daiyp2009 (1408)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- tool_guide (19543)- Feedback left by buyer.More than a year agoVerified purchaseValuable customer! Pleasant transaction. Excellent buyer.A+++++
- creabest2017 (14691)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
Reviews (2)

01 February 2018
Too big to fit in Fitbit Surge
The price is good and the battery works, but the problem is that the plastic, specifically the black plastic near the red and black wires on the back of the battery extends past the correct length of the OEM battery. This means that the battery WILL NOT FIT into the Fitbit Surge battery location. To fit the battery into the correct location I had to cut a portion of the protective black plastic from the battery, risking destroying the battery, even then, the battery could only just fit in. The product should be the correct size if it is advertised and sold as a "FITBIT Surge Replacement Battery".
I have said that is good value but it is marginally good as I could have destroyed the battery to make it fit, then it would be useless and very poor value.

16 April 2018
Very good for Golf Buggy
I have a 48 volt Club Car golf buggy. The unit connects directly to the Red 48V positive and Blue negative wires. The unit will read the correct voltage, however, the capacity bars and percentage will not read correctly until you change to the correct settings. This CANNOT be done following the information supplied in the product description. To enter the settup, you have to introduce power to the unit while pressing the Setting Button. ie. connect the red and black wires to your system and then when ready, press the Setting button while inserting the white connector into the rear of the unit. The unit reads in multiples of 12 volts, hence you will need to set the unit as P04 ie lead acid 12 volt times 4 to give the correct readings for a 48V system.
Bottom line a very good product.