About
All feedback (1,559)
- *****- Feedback left by buyer.More than a year agoVerified purchaseArrived well packaged and as a great replacement watch for my broken one. Many thanks - recommended to all A ++++
- *****- Feedback left by buyer.More than a year agoVerified purchaseGreat Buyer, Visit us again!!! BetaMedia.com.au
- *****- Feedback left by buyer.More than a year agoVerified purchaseItem as described, fast postage. Great service.
- xin8095 (4419)- Feedback left by buyer.Past monthVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- augoods (19536)- Feedback left by buyer.Past 6 monthsVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- joynewsalebuy (374)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
Reviews (4)
06 April 2017
Almost perfect
I am an expert overclocker, having been at this for 15 years now - both Intel and AMD.. I wanted *THE BEST* 140mm fan for the top fan mount on my NZXT S340 on exhaust mode: This is where I noticed the first issue (I will discuss 2 issues which are the only problems, and if they are addressed it is then a PERFECT 5/5, 'cannot get any better' product) - first upon mounting this as an exhaust fan, one notices that the fan isn't half as 'pretty' because the fan labelling isn't mirrored (many fans are the same) - so you don't see Akasa label if you are using this fan as an exhaust fan/on pull mode) - the 2nd, and more important issue - is related to this. While the case was without a motherboard during a rebuild (Changed motherboards and CPUs, liquid cooling) the case had only the Akasa fan mounted - and it got knocked over. I panicked because it appeared the fan had come apart - into 2 pieces (the blades separated from the housing) and it had only a slight knock. I would have thought AUD35 would buy a more hardy fan than that - literally falling apart from nothing more than the case tipping over.
Apart from these 2 gripes, it IS indeed a good fan - the 2nd issue didn't turn out to be a major issue, didn't require RMA - it simply went back into place, but I think that wouldn't have happened had the fan be used on PUSH (opposite of exhaust). I can only assume this fan is NOT designed for exhaust and that is sad,because it is the (spec-wise) best exhaust fan in 140mm money can buy. I didn't mind paying AUD35 for an item that is essentially pulling hot air from $1000+ of equipment below it. If Akasa are reading this - can you please take my advice and design the fan differently so it can be used on both push and pull?
I would prefer some options in colours - I saw there is only the yellow fan with black housing but that's ok. I am not so into 'pretty' PC's, prefer the function and performance being the highlight.
So despite my 2 gripes about it, I am still giving it 5 stars.
tl;dr if you want the best quality PWM fan (for push especially, but also pull mode) money can buy, you cannot go past this product. Nothing out-performs it.
10 August 2019
Don't bother.
It works but barely. It feels TERRIBLE and also looks pretty bad. I do not recommend, unless these are priced for 10$. Also on mine the H key is sitting lower that the other keys and is not working properly.
23 July 2020
Very firm compound. Will take longer to wear out. Great combo tread for both off and on road.
These tyres are made with a harder compound of rubber, so for me they're perfect. Great for both on and off road. The combination of the tread and hardness of rubber should be a lot more thorn-resistant than the last tyres I bought.
These cost $55 a pair which isn't cheap but they couldnt be wrapped up into a flat package because they're such a hard compound, they were in a large-ish box, so that added to cost.
I am very happy with these.