About
All feedback (185)
- jna_distributions (12704)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- bp2223 (14667)- Feedback left by buyer.More than a year agoVerified purchaseFast Payment, Thank You For Your Business, We appreciate E-bayers like YOU !!
- flybirdtech (90)- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- mirth-us (373)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- timsautopartsinc (1646)- Feedback left by buyer.More than a year agoVerified purchaseWe have the best customers ever!!
- hobbymc (27568)- Feedback left by buyer.More than a year agoVerified purchaseThanks for shopping at HobbyMC! We love what we do because of people like you!
Reviews (4)
22 January 2019
Perfect item to complete my project
3 of 3 found this helpful Bought a new custom bezel for my Nova and was putting it all together. I was just going to use plain LEDs when I stumbled on these.
Thread holes are 5/8. They come with an oring to help keep them tight and straight.
Love the product and worked perfectly
I chose
Seat belt
Battery
High beam
Two signals
Parking brake
New A/C Condenser CN 3493PFC - 3C0820411D - Passat CC
24 April 2016
Good Product, 2014 Passat
The 2014 Condenser replacement on VW junk (Passat) is fairly complex.
The housing for the radiator and condenser is one unit.
Remove Headlights
Remove Bumper
Remove Radiator retaining bolts
Remove radiator/condenser mounting brackets from the sides of the housing
Remove/drop the airdam due to the radiator weight
angle housing toward front of the vehicle
Angle radiator towards back of vehicle
Drain condenser - Move lines out of the way
slide condenser out
Lastly - The actual product review
The product is a direct replacement for the OEM condenser
Dropped in and bolted up normally
I did not give it 5 star based on one installation problem.
The only problem I had was with the lower AC line (low pressure side)
The hole on the old factory condenser was .5mm larger.
I removed the o-ring from the line and capped the hole
Used plumbers sand paper to sand down line (luckily it is very soft aluminum)
The used channel-lock plyers and tapped with a hammer to squeeze the line onto the condenser.
It took about 20-30 minutes extra to get the line onto the condenser correctly.
I would have returned the product and done some research on the line size, but with the front end of my car torn apart I could not wait. A little modification was all that was needed.
08 May 2009
Great Unit
Good Excercises and very informative.
The board is sensitive and accurate. Make sure you have the board facing the right direction otherwise motions and weight shifting is backwards.
The unit is not shy!!! If you think you are slightly overwieght and can't take hearing the word "obese" don't even turn the unit on. It tells you the truth!!!