About
All feedback (2,487)
- thesavagescience (1042)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- alabah-20 (341)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- onsuperfactory (2293)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- kaifab96 (189)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- carpartswholesale (3358830)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- utahwis (34237)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (10)
09 November 2017
Worked Great on a gas Drier
Worked as advertised. Dryer now works again.
02 July 2016
Great Value
Good little remote for light home use, Controls the LED's Well and doesn't get hot under load. Remember NO BATTERY INCLUDED REMOTE, must get a 2025.
23 July 2016
Great Cheap Board
1 of 1 found this helpful This is a great "BARE" Board. You must download and use a CH340 serial driver, the stock Arduino driver will not work with this board.
The LED light installed is only for power, an LED is not installed in the L location of the board and neither is its accompanying resistor. To load and use the blink program, you must install an led with resister onto pin 13 and ground. Arduino IDE and its librarys work fine with this board.
Great Cheap Board!!
Good Luck!!!!