About
All feedback (2,592)
- a***s (103)- Feedback left by buyer.More than a year agoVerified purchaseGreat seller and repair service. Went above and beyond and communication was on point. Highly recommend
- *****- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- mnmendeavor (2217)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for easy transaction, we hope to deal with you again. A+ Buyer!
- kreemstore (358)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- e-bojo (8786)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- cripedistributing (511223)- Feedback left by buyer.Past 6 monthsVerified purchaseWe appreciate your purchase and look forward to continued business in the future
Reviews (3)

06 June 2019
It really saved me money on buying new seat!
It really saved me money on buying new seat! I think it may be possible to do without removing the seat. You will need needle nose pliers to open O-rings that hold fabric to the seat. Be very careful to avoid ripping off rails from the foam when pulling up fabric. Use 1/4" or bigger drill bit to remove old rivets and replace them with 5x 1/4" screws with lock nuts. It took for me half day since I never did it before.

07 January 2018
You get what you paid for...
Top handle fell off right out of the box. Had to take it apart to put it back in place. Built on TL494 chip and won't have high efficiency. 30V*10A=300W. It's won't be able to handle it for a long time for sure (heat sinks are too small for that). Power cable is only 0.5mm2 and needs to be replaced right away (too thin). Sticker with model on the front wasn't aligned and was peeling. Had to put it back properly. Capacitors from no-name manufacturer and may die soon (no problem for me to replace them).
But overall I hope it's going to be a helpful tool for me.

17 October 2024
Much better quality than original Ford/M...
Much better quality than original Ford/Motorcraft: more threads per inch, a bit thicker and harder rubber. Just as hose should be.
Get Gates hoses or standard 8mm/16mm/19mm/38mm hoses if you fed up with replacing transit hoses all the time.