About
All feedback (1,355)
- ccmiller931 (5631)- Feedback left by buyer.More than a year agoVerified purchaseQuick payment, quality transaction, come back anytime!
- brainpan62 (25232)- Feedback left by buyer.More than a year agoVerified purchaseSuper smooth transaction. Thanks for your business!
- autumnzhang001 (1356)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- bexcost (134833)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
- cmwrace (5800)- Feedback left by buyer.Past monthVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- sargeatlargeusmc (425)- Feedback left by buyer.Past 6 monthsVerified purchaseFast payment, excellent buyer!
Reviews (3)
30 November 2019
Not for the $
1 of 1 found this helpful Not well designed. Expected a better fit. Inner lining moves around in shell. Would not buy again.
07 November 2018
A good buy, but . . .
1 of 1 found this helpful When I opened the box and reviewed the contents, it was well packaged and appeared to be of a good quality. The instruction sheet was very general and not specific to the Legacy model we installed it on.
The lights went in easy, but the shrouds didn’t quite fit and I had to use a heat gun to warm the plastic enough to get them to seat. The wiring harness could have been designed better as the section that runs from the lights to the battery/ fuses box area was a little short, but workable. There were no instructions on running the wiring harness through the firewall or for mounting the switch. I found a rubber plug near the top of the firewall that I removed, drilled a hole in and ran the harness into the passenger compartment. The switch doesn’t fit in the dash anywhere so I made a bracket and mounted it on the side of the transmission tunnel.
There are two + wires to attach. One mounts easily directly to the battery and the second is labeled Lg, mislabeled (should be Ig, ignition). This wire I spliced onto a green with brown tracer wire on the back of the fuse box on the left side of the driver compartment.
Although there were a few challenges and some head scratching, it went together and they do work well. Compared to buying an OEM set, they are worth the extra effort.
18 October 2017
Good quality at a good price.