About
All Feedback (387)
geekyvibes (37478)- Feedback left by buyer.
Past 6 months
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
ibteche-0 (2333)- Feedback left by buyer.
Past year
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
tirebuyer (90913)- Feedback left by buyer.
Past year
Verified purchase
Good buyer, prompt payment, valued customer. Highly recommended.
highpartsfactory (4107)- Feedback left by buyer.
Past 6 months
Verified purchase
Great communication. A pleasure to do business with.
americansportsproductsusa (10795)- Feedback left by buyer.
Past year
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
supershieldz (516739)- Feedback left by buyer.
Past year
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
Reviews (11)
18 June 2020
The 1.25" bar does not fit a standard Curt 1.25" hitch reciever - too thick.
The 1.25" bar end does not fit a Curt 1.25" hitch reciever - it's too thick in the corners, by about 0.5 - 1mm.
And I've successfully used this 1.25" hitch reciever with two hitches, as well as the old 1.25" bicycle rack which fit properly. I don't think this rack will fit any 1.25" hitch reciever unless it's abnormally large, more like a 1.27"
The 2.0" is achieved via a plastic adapter, I can't judge how well that would fit a 2.0" reciever.
30 May 2019
Awkward to attach to tank.
It doesn't have a convenient way to strap onto the tank. It has a zipper and at first I thought that zipper would allow for quick removal of the bag from tank for refueling, but no - you apparently have to unstrap it from the tank to refuel. Not sure why you would ever want to unzip the main zipper... Also it came very squished, it's semi-soft I get that but this one looks like it's been ran over multiple times.
14 November 2016
Does not fit geometrically by like 2 inches. And terrible quality overall.
2 of 2 found this helpful 1) Does not fit geometrically by like 2 inches - when top of bumper cover aligned with headlight - it hits the impact bad when it still has like 2-2.5 inches to go.
2) Terrible quality. Fibers sticking out up to 0.5 inches long on the inside! Mounting holes DON'T EXIST! The slabs where they are supposedly expected to be drilled in - are up to an inch off from where they were supposed to be! I wish I could just attach pictures. Inconsistent thickness - randomly varies from 2 to 5mm along the edges, and no it's not thicker for mounting holes or anything - just random fluctuations. Cracks and chips on most edges. Edge quality is barely better than "this was chewn off by a dog" kind of edge. Lack of symmetry everywhere...
And btw - I installed aftermarket bumpers before. RWCarbon's for example. Sure it wasn't as precise of a fit as the OEM, and holes in the plastic were maybe 1-2mm off, but not 2.5 inch mismatches with fundamental geometry!