About
Reviews (3)
22 March 2018
RF45 Installation
1 of 1 found this helpful This inexpensive digital read out (DRO) set is a nice addition to a Rong Fu 45 mill. It avoids most problems with slop in the different lead screws. The only negative feature is that it comes with no instructions and no instructions could be found on the internet other than some owner installations. Although a some attachment brackets came with the set each gauge installation required fabrication of one or more brackets. The scales can be cut to size but it is important that room be allowed for the full travel of the table or saddle to avoid crashing the reader at full travel. It should also be noted that the vertical orientation of the gauges require that the wire exiting the reader should be oriented up to avoid a 3 percent error. This fact was mentioned by another reviewer and I have no explanation why the orientation should matter. I also fabricated a cover for the 36 inch gauge to protect it from chips.
16 August 2016
Repeat buy.
1 of 1 found this helpful This is a replacement for the same mirror that broke when my bike fell over. This mirror is mounted on a recumbent bike with handlebars as wide as my torso so that it provides good view to the rear. You will need to rough up the mating services with some sand paper to keep the mirror from moving out of position do to normal vibration while riding.
06 January 2017
Small floor heater draw about 1500 watts failed due to thermistor. Replaced with this 128c thermistor which also failed.
Heat at location of thermistor approx. 50C. Will try 192C thermistor. Delivered within week of order.