About
All feedback (282)
- ihf4szhoqgo@Deleted- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- ao (278602)- Feedback left by buyer.Past monthVerified purchaseThanks for shopping with us! AO
- dfurnituresuppliers (4573)- Feedback left by buyer.Past monthVerified purchaseGreat communication. A pleasure to do business with.
- ramatek (737)- Feedback left by buyer.Past monthVerified purchaseThank You For Shopping With RamaTek
- apdtechnologies (27651)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat Seller, Fast payment and easy transaction
- shengshijc_2 (2550)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy,pleasant transaction.Excellent buyer.A++++
Reviews (7)
16 June 2017
Bits for good to go
Old fan had broken due to age and use and a replacement was required. The item that came was not as per the photograph but totally compliant with our machine. Colour and design slightly different probably due to age of machine and newer replacements available. The fan is relatively easy to fit to the spindle on the motor and simply clips on and is then held in place by the spring clip. Access to our machine was basically just removing the small back panel then re-assembling with a few screws.
Would highly recommend the supplier and the component. There might be alternatives and price deals from time to time but then a case of paying your money and taking a chance.
With all electrical repairs always disconnect from the mains first.
If your DIY ing then plenty of Youtube videos to help
16 June 2017
Compatible with a variety of machines. simple plug in and attach back to housing.
Replacement for old heater which broke when dryer turbo fan broke leaving us with only low heat. new fan and heater so back in business. Accessing the old unit was a bit of a pain but now in situ machine is almost like new when it comes to drying performance.
08 February 2018
ok ish
the seal is ok but only comes with 4 fitting clips so some adapting the join/central one is required if you don't keep the original bits.
It's OK but not as good as the original one but makes a decent seal to at least keep heat from escaping.
The omission of anything to secure the middle bits together on the top of the inside of cooker is the major failing but can be bodged together if necessary. The actual seal is fine although trying to get the clips into the seal to hold it to the 4 corner holes again is not easy and needs a certain amount of pre-though and mitring the seal correctly so it fits flush to the 4 corner shaping/securing brackets.