About
All Feedback (3,912)
jjcraceandrally (516575)- Feedback left by buyer.
Past month
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended..
gwr-fasteners (485888)- Feedback left by buyer.
Past month
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
a2zfast65 (140856)- Feedback left by buyer.
Past 6 months
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
a2zfast65 (140856)- Feedback left by buyer.
Past 6 months
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
carousel_car_parts (323366)- Feedback left by buyer.
Past 6 months
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
carousel_car_parts (323366)- Feedback left by buyer.
Past 6 months
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
Reviews (6)
20 December 2016
Good quality tool
3 of 3 found this helpful Used this for the first time to undo a driveshaft nut and two rusty top dampers nut respectively torqued to 250nm and 70nm and it quickly removed both of this,without any problems,the driveshaft nut also was slightly stacked in place and that didn't cause any problem so there is plenty of power for every bolt you can come across on a small hatchback car,only note is that I had to recharge the battery as it didn't have enough power after taking off the two other bolts,the 1 hour charge is good but a second battery would be advantageous.
I wouldn't suggest using the sockets included in the box as they do not seem to be impact sockets but rather just normal ones especially if you're going to use them for high torqued bolts,the gun also comes with a 12 months warranty.
All considered for me it's worth the money and pretty useful tool to have in your toolbox,plenty of power available.
28 May 2016
.
4 of 4 found this helpful I do a lot of motorway and any noise reduction is welcome,I've used this for the first time as under bonnet sound proofing,the 10 sheets were just enough to completely cover all the possible areas,it's pretty easy to cut and apply with a roller,the adhesive is pretty strong.
At idle I honestly didn't find any differences but when driving the noise reduction from the engine is quite impressive,at motorway speed (around 60mph for me) the road noise now completely covers the engine noise which thanks to the sound proofing you can hardly hear,I'm planning to use this for other areas as well to have the best possible noise reduction.
Very happy with the result and I think it's cheap for what it does,definitely recommend it.
15 July 2019
Every should come as standard with this.
Very effective way to tie the two lower chassis legs which are a weak point,it's like having a massive arb,greatly improve the front end,with -35mm springs no problem of scraping anywhere even on big bumps as long you're sensible and slow down.