About
Reviews (2)
31 July 2019
Dries hard, but not easy to work with
Warning this stuff is very finicky. The first can I used shot out a clumps of solvent and product which when dried ate into the base coat and primer. I had to sand all the way back down to recollection my project. On this second attempt I laid tack coat and then 3 wet coats. 2 hours later my panel developed "solvent pop" I waited 24 hours and discovered that at least the solvent pop to come fully to the surface. (They are small gas bubbles that come up through the finish) I have been able to sand 95% of them away. And still had enough clear coat to polish.
08 July 2024
Saved my life
I installed this part and it was on my Mustang for approximately 7 months before one day it came in handy. Long story short I almost had a head-on collision but had to tuck with nose into the curve to avoid, there was no body roll because of the brace. If you don't have one get one for your car.